...configuration: - Supermicro X10SRA-F - Intel Xeon 2695v4 - 4x8GB DDR4 2133 ECC-REG - 8x8TB Wd RED in RAIDZ-2 configuration - NIC Intel X520-DA2 - FreeNAS 11.2 I use only one interface on X520-DA2 NIC (I configured with static ip address, netmask and gateway), but when I restart (or power off...

...System details: - Fujitsu D3417-B1 - Intel Xeon E3-1225 v5 (the Core i3-7100 won't work at the moment but that's another story...) - 2x 8Gb Samsung ECC RAM - FreeNAS 11.3-U3.2 installed on a Intel Optane M.2 Card - Intel X520-DA2 PCIe - no harddrives connected at the moment

Hi I am on TrueNas Scale, 22.12.3.3 I have physically connected an Intel network card "SFP+ 10Gbit LP/FH X520-DA2 E10G42BTDA Bulk" to a SFP+ Port of my Unifi USW-48-PoE Switch, with an SFP+ cable. In Scale i see the 2 adapters of the X520 card, but they seem to be inactive. enp4s0 is the...

Hi Guys, Just testing FreeNAS with an X520-DA2 card. We have two FreeNAS boxes with identical hardware - same issue on both. Card comes up fine ix0-1 but the state shows as "NO CARRIER". These are band new FreeNAS builds. Systems are fully testing and working on VMWare. ifconfig -m shows...

...capping my I/O. Very quickly my NAS hardware is a Xeon E3-1220v3 with 32GB ECC with an Avago/LSI 9201 16 port HBA (latest FW) and an Intel X520-DA2 dual 10G NIC, Drive Pool's include a 6 x 8TB RZ2 and a 4 x 256GB SSD Mirrored (Raid 10 equivalent I assume) All works flawlessly as far as...

Hi, I've got the X520-DA2 installed into my FreeNAS and it recognizes it, but I can't get it to light up. Any tips or tricks? lspci: 08:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 08:00.1 Ethernet controller: Intel Corporation 82599ES...

Добрый день! Есть intel x520-da2, в которой SFP+ модуль 10Gb. FreeNAS-9.3 ifconfig igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO> ether 0c:c4:7a:16:97:60 inet...

...running on 10G the server becomes unresponsive until I kill all jails from the command line. I've tested this on every version hoping that they'll some day fix it but I finally decided to post. I'm running 11.1u5 and I've got the intel X520-da2 10G cards. Has anyone else seen this behavior?

...below. At the moment, the NAS runs off of its built in NIC, but I am planning on buying a 10Gbps NIC. I have my eyes on an Intel X520-DA2 from oracle, which is for sale on eBay including MMF transceivers. Please don't laugh at me, but my question is whether the brand of the X520-DA2...

...freenas version on the SSD's and re-uploading the config. After that somehow I managed to cause weired networking issues with my Intel X520-DA2 network adapter. Somehow I managed to delete the ix1 interface, under Network -> Interfaces, only the ix0 interface is listed now. When I now...

Have intel x520-da2, with SFP+ 10Gb. FreeNAS-9.3 ifconfig igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO> ether 0c:c4:7a:16:97:60 inet 0.0.0.0 netmask 0xff000000 broadcast...

I'm still new to FreeNAS but couldn't resist to pimp my box with a 10Gb network adapter. So I got a pair of Intel X520 da2, put one in my FreeNAS box, and the other in my windows machine. I connected both sides with two fiber optics, and set up different subnets on each pair of the connection...

...at some point or get around to replacing it entirely, then I'll install whatever is current. Server: HP ProLiant DL 380e Gen8 Card: Intel X520-DA2 (Dual Port 10G card) Build: FreeNAS-9.10.2-U6 (561f0d7a1) Switch: MikroTik CRS317-1G-16S+ Small history: I recently had a hardware failure with...

After booting the NIC works just fine. After a random amount of time - sometimes 7 days - sometimes 5 hours the NIC just goes down. Ifconfig only show status: no carrier. I am not sure whats the issue here, i just realised there are newer drivers in FreeBSD for this NIC. Is it possible to add...

...VM hosts. While the hardware varies (in both generation and brand) between all of these components, pretty much everything uses an Intel X520-DA2. Originally selected the 2 port variants to reserve one port for iSCSI and the other for Management/Shares (Not iSCSI)/etc. While 10gbps is a...

No, the Mellanox is not the X520-DA2. An X520-DA2 is an Intel card.

Hello, dear community, I'm selling a couple of items from my homelab. 1) supermicro x12spl-f - 410€ 2) supermicro x12spl-ln4f - 435€ 3) supermicro sc826be1c-r920lpb - 650€ 4) supermicro sc846be1c-r1k23b + Rails - 1350€ 5) intel-xeon-silver-4310-processor x2 - 350€ each 6) DELL 0VFVGR X520-DA2...

According to the specs the Intel X520-DA2 supports only SFP+ Direct Attached Twin Axial Cabling up to 10m. The specs says that it supports both 1 GbE and 10 GbE.

...connection losses, also in FreeNAS itself. For trouble shooting I switched over the parent interface for my VLan 20 from my 10 GbE Intel X520-DA2 to one of my on-board 1 GbE Intel NICs. Since this time the system is not recognizing any connection loss to the KNX system, whether to the...

Hello all, I wonder if anyone had any thoughts on my issue. I have a (used) Intel X520-DA2 (appears genuine) that isn't recognised in a known good Scale machine (Gigabyte GA-B250M-D2V / Intel G4560 / Intel NIC PCI). I also placed it in another machine and it wasn't picked up. I then clean...

The specs are full of CRAP.

Thanks for your answer Yorick, but my question is about the card Fujitsu D2755 which use the same chipset (Intel 82599) that the Intel X520-DA2. I'm wondering if the Fujitsu works like the Intel or it's cutted. Intel specs Fujitsu specs Thanks!

Hi, I installed 3x x520 (not sure wheater DA2 or SR2), they got reconized by TrueNAS 01:00.0 Ethernet controller: Intel Corporation 82599 10 Gigabit Dual Port Network Connection (rev 01) 01:00.1 Ethernet controller: Intel Corporation 82599 10 Gigabit Dual Port Network Connection (rev 01)...

Hi, I'm looking for where I can report or any comment on a NIC not being detected after the latest update. (11.3-U2.1) Hardware is an Intel x520-da2 dual NIC. I'm going to roll back the update and try to do some other testing, but wanted to see if I can engage the community in parallel...

Hi, Windows workstation and server are connected directly by a DAC Copper cable (I ruled out the cable issue by using 3 differents brands and cable length). XA520-DA2 Cards and Driver 4.1.197.0 - 27/11/2019. Windows 10 Pro / FreeNAS (latest version) The problem is that Bandwith results are...

Fine. Higher-end and newer. That's just an X520 with non-removable SR optics.

The HPE 560SPF+ is a HPE rebranded Intel X520-DA2, it uses the Intel 82599 controller. https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111506

The second I connected the cable the media status changed from "no carrier" to "active". At this point the only thing fro troubleshoot is the QLE8152. The green lights are blinking with or without cables (does not get the link connected as FreeNaS). I started a different thread in reddit for...

Dans mes deux serveurs j'ai d'un coté une Chelsio T520 et de l'autre une Intel X520, les deux marchent très bien avec FreeNAS. Attention les X520-DA2 ne supportent que les cables Twinax (DA= Direct Attach) et pas les convertisseurs optiques.

What about support for the Intel X710-DA2 in FreeNAS? Is it already a good choice to use since it costs almost the same as the 6year old Intel X520... and although being time-proved there a probable improvements regarding features and TDP.

Dumped the Samsung P983 and switched to Micron 7300 Pro 960GB. I’m still scouting for a 10GBE SFP+ PCIe card. X520-DA1/2 (and it’s clones) or Mellanox are the obvious candidates. What about Intel X710-DA2, X520-SR2?

That's clearly not an Intel X520. Someone may have named it "X520" to confuse the issue, it might even attempt to be a knockoff of an Intel X520. I suggest returning it for a refund. The Intel cards are green PCB with a bar across the bottom. Even those get faked. Legitimate Intel retail...

...soprattutto con sistemi Free-BSD. Quindi ho restituito anhe questa scheda e acquistato su ebay una Sun Oracle 7051223 basata su intel x520-DA2. Ho collegato il NAS ad uno switch Zyxel xgs1250-12 acquistato un paio di settimane fa con cavo DAC. Tutto ha funzionato subito bene, tuttavia la...

I don't have a thread, I searched here in the forum and in google. Intel X 520-DA2 https://www.ixsystems.com/community/search/385781/?q=intel+x520-da2&o=relevance But I think this has nothing to do with this message a saw in the FreeNAS Console.

Will be getting a switch anyways so buying that Intel X520-DA2 could actually be worth it in the future (if I manage to actually find it on a low price, in my country there are shops that sell it for 300€ haha).

Just confirming Intel X520-DA2 ($65) works great on 11.3 u4.1. My desktop has an Emulex IBM 10Gb card in it and everything seems solid for 1 week now.

I have been using it for 3 months now without a single issue.

...convenience sake. Brand does matter because various manufacturers implement vendor locking of their optics, such as Intel, where an Intel X520-DA2 requires an Intel branded optic, but a Dell 82599-based card will accept Dell optics. The Sun Oracle one you link, for example, looks to me...

I had the same problems with Intel X520-DA2 cards. Changed to Cehlsio T520-CR and much better performance. I battled the Intel card for years and could never get it to preform correctly. Post with my issues How to replace NIC in lagg

Be aware that there are a large number of knockoff X520 cards out there, and that these are expected to crash, not work, cause panics, etc. If your card doesn't have an Intel Yottamark on it that passes validation, I'd suggest trying a different card. The words "new X520 from Gtek" are a big...

Bonjour Laurent33, je suis nouveau sur ce forum et c'est ma première contribution. Je partirais sur cette carte : https://ark.intel.com/products/39776/Intel-Ethernet-Converged-Network-Adapter-X520-DA2 Intel fournit les pilotes FreeBSD pour ce produit, mais je n'ai pas validé moi même. À+

...community Edition Using Zfs and ISCSI services Server Hardware: i5-2320 ,4G ram, SSD *2 (stripe)(Toshiba Q-series 256GB),Intel X520-Da2 Client Hardware & OS: i5-2320 ,4G ram,7200 RPM HDD,Intel X520-Da2, Windows 7 32bit Benchmark Software : IOMeter 1.1.0 without any tuning 4k 100%...

...iscsi storage solution (1U server) for vm pool ,budget $3500. server:Asrock 1U12LW-C2750*1 (upgrade to 32GB ecc) $1020+400 NIC:Intel X520-DA2*1 $300 HDD:WD black label *12 $840 switch D-Link DGS-1510-28X*1 $700 never build NAS server...

Our older systems are running 10Gbe Intel x520-DA2 and Intel x710-DA2 cards. Our newer systems are running 25Gbe Intel XXV710-DA2 and 25Gbe Broadcom Dual Advanced cards. Our guest OSes run just about anything you can think of. Some of our older customer systems are running SCO Unix from the...

...so your Oracle branded card almost certainly came out of a Sun server or workstation. You can certainly give it a Google or two, to see if anyone's ever had any problems with an Oracle-branded X520-DA2, not a bad idea, but it really looks like an off-the-Intel-production-line Intel X520-DA2...

We run the Intel X520-DA2 with no tuning. Out of the box: 6-7 gbps. That's a lot better than the bonded pair of gigabit NICs it replaced so we haven't bothered to do anything else. Cheers, Matt

Meh. Sending it back. Yottamark checks out but I cannot find a damned thing on this device ID. Can't flash it with any intel tools or anything. Getting a new X520-DA2. Twice the cost but tired of messing with this.

We'd need some sort of information about what you're trying to do and what you've got hooked up. The X520-SR2 works fine, and the -DA2 should work fine as long as you've loaded Intel optics or a compatible twinax cable.

https://www.ebay.de/itm/224569564399?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=0I4O_8y-TZm&sssrc=2349624&ssuid=t7XOHx9XR9S&var=&widget_ver=artemis&media=COPY Intel X520-DA2 Version from HP for 60€ - probably 70€ with shipping… professional seller

...CIMC... CPU1 Xeon 2400 status enabled CPU2 Xeon 2400 status enabled Memory is all cisco memory 376832 MB dimm status is good Dual PSU both UCSC-PSU2-1200 PCI Adapters Intel I350 1 GBPS Network Controller Intel x520-DA2 10 GBPS 2 port NIC LSI mass storage controller LSI mass storage...