Hi,
I have a storage server built as follow:
- FreeNas 11.2U5
- SuperMicro X10DRH-CT (using the last bios)
- 2x CPUs E5-2643 (total of 12 cores/24 threads @ 3.4Ghz)
- 64 GB RAM DDR4 ECC
- 16 GB RAM NVDIMM DDR4
- Few HBA and Disks
On the bios, i set theses properties:
- Enable ADR [Enabled]
- Erase-Arm NVDIMMss [Disabled]
- Restore NVDIMMs [Enabled]
- ACPI Shutdown Trigger ADR [Enabled]
On FreeNas (before populated NVdimm), i turned on some tunables:
- Set nvdimm_load to YES the loader tunable
- Set ioat to YES the loader tunable
The kldstat showed theses modules successfully loaded:
When the NVdimm is populated, the freenas is starting and crash with this following error:
If someone have any idea of what to do !
Best Regards,
Sébastien.
I have a storage server built as follow:
- FreeNas 11.2U5
- SuperMicro X10DRH-CT (using the last bios)
- 2x CPUs E5-2643 (total of 12 cores/24 threads @ 3.4Ghz)
- 64 GB RAM DDR4 ECC
- 16 GB RAM NVDIMM DDR4
- Few HBA and Disks
On the bios, i set theses properties:
- Enable ADR [Enabled]
- Erase-Arm NVDIMMss [Disabled]
- Restore NVDIMMs [Enabled]
- ACPI Shutdown Trigger ADR [Enabled]
On FreeNas (before populated NVdimm), i turned on some tunables:
- Set nvdimm_load to YES the loader tunable
- Set ioat to YES the loader tunable
The kldstat showed theses modules successfully loaded:
Code:
> kldstat Id Refs Address Size Name 1 73 0xffffffff80200000 25608a8 kernel ... 6 1 0xffffffff8287f000 cee8 nvdimm.ko 8 2 0xffffffff82892000 11188 ioat.ko ...
When the NVdimm is populated, the freenas is starting and crash with this following error:
If someone have any idea of what to do !
Best Regards,
Sébastien.