TW1920
Dabbler
- Joined
- Jan 4, 2019
- Messages
- 12
Hello,
yesterday evening my system disk is crashed - it's completly dead. So finally normally no big deal: New disk, (data is raid, but the system disk wasn't), install FreeNAS, upload config, reboot, all should ok.
I did this on my second one and had no problems doing this.
In this case I have to problems - the first one isn't in my opinion a real problem, the second is a great one:
1. I didn't created a copy of the config after I created a VM - so now this one isn't visible anymore. I thought that I can reconfigurate the VM and bring it up in this way. Is this working? But if not wouldn't be important because it was at this time only testing stuff I can recreate. I didn't had the possability to test to restore the vm cause of th big problem:
2. After importing the saved configuration FreeNAS is coming up, Jails are starting and getting up and working. Short time later unexpectly FreeNAS is rebooting - I don't know why - couldn't see any message why and couldn't found any log to check what happening.
I don't know what's going wrong :(
Before FreeNAS was working very well and stable - does anyone have an idea what could be the problem or how to fix it?
If I set FreeNAS to default setting - what exactly will happen? The main config of the system isn't important, I can do it again, only the Jails and bhyve VMs or other stored data on the data zpool shouldn't get lost or out of the management of FreeNAS.
I hope someone can help me
Greets
yesterday evening my system disk is crashed - it's completly dead. So finally normally no big deal: New disk, (data is raid, but the system disk wasn't), install FreeNAS, upload config, reboot, all should ok.
I did this on my second one and had no problems doing this.
In this case I have to problems - the first one isn't in my opinion a real problem, the second is a great one:
1. I didn't created a copy of the config after I created a VM - so now this one isn't visible anymore. I thought that I can reconfigurate the VM and bring it up in this way. Is this working? But if not wouldn't be important because it was at this time only testing stuff I can recreate. I didn't had the possability to test to restore the vm cause of th big problem:
2. After importing the saved configuration FreeNAS is coming up, Jails are starting and getting up and working. Short time later unexpectly FreeNAS is rebooting - I don't know why - couldn't see any message why and couldn't found any log to check what happening.
I don't know what's going wrong :(
Before FreeNAS was working very well and stable - does anyone have an idea what could be the problem or how to fix it?
If I set FreeNAS to default setting - what exactly will happen? The main config of the system isn't important, I can do it again, only the Jails and bhyve VMs or other stored data on the data zpool shouldn't get lost or out of the management of FreeNAS.
I hope someone can help me
Greets