billgreenwood
Dabbler
- Joined
- Apr 11, 2014
- Messages
- 42
Hi all,
I'm resilvering a disk it's and it's extremley slow. I dont have any users connected, i have AFP and SMB, Smart and UPS on. Nothing else, no jails running, no VMs, no plugins.
I'm getting 27.8M/s
I have
vfs.zfs.resilver_delay=0
vfs.zfs.resilver_min_time_ms=500
vfs.zfs.scrub_delay=0
vfs.zfs.top_maxinflight=128
My system is in my sig, I know it's not the fastest but the crux of it is
System - FreeNAS-11.3-RELEASE
Motherboard: Supermicro MBD-X9SCM-F-O
CPU: Intel BX80637E31240V2 Xeon Quad-Core Processor 3.4 GHz LGA1155
RAM: 32GB DDR3 PC3-10600
SATA Controller: IBM M1015 RAID card flashed to IT mode
Disks: 10 x WD Red 6TB WD60EFAX (Raid z2)
This is from my zpool status | more command
Can anyone see any issues here?
Or have any input or ideas
Cheers
Bill
(I resilvered a disk on another system last week and the same WD RED 6tb drive took about 12 hours)
My other system is
Supermicro MBD-X10SL7-F-O
Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz (4 cores)
RAM: 32GB DDR3 PC3-10600
LSI 2308 flash to IT mode
Disks: 10 x WD Red 6TB WD60EFAX (Raid z2)
I'm resilvering a disk it's and it's extremley slow. I dont have any users connected, i have AFP and SMB, Smart and UPS on. Nothing else, no jails running, no VMs, no plugins.
I'm getting 27.8M/s
I have
vfs.zfs.resilver_delay=0
vfs.zfs.resilver_min_time_ms=500
vfs.zfs.scrub_delay=0
vfs.zfs.top_maxinflight=128
My system is in my sig, I know it's not the fastest but the crux of it is
System - FreeNAS-11.3-RELEASE
Motherboard: Supermicro MBD-X9SCM-F-O
CPU: Intel BX80637E31240V2 Xeon Quad-Core Processor 3.4 GHz LGA1155
RAM: 32GB DDR3 PC3-10600
SATA Controller: IBM M1015 RAID card flashed to IT mode
Disks: 10 x WD Red 6TB WD60EFAX (Raid z2)
This is from my zpool status | more command
pool: zpool
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Tue Mar 10 23:41:51 2020
2.12T scanned at 1.02G/s, 57.4G issued at 27.8M/s, 42.2T total
3.97G resilvered, 0.13% done, 18 days 09:50:53 to go
config:
NAME STATE READ WRITE CKSUM
zpool DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
gptid/d440d1bb-5ba1-11e6-8771-002590db3d35 ONLINE 0 0 0
gptid/6b71bf82-caa0-11e5-a2cf-002590db3d35 ONLINE 0 0 0
gptid/6c85a56d-caa0-11e5-a2cf-002590db3d35 ONLINE 0 0 0
gptid/9866ea39-b6be-11e9-83ae-001b21be2188 ONLINE 0 0 0
gptid/6ea11b8e-caa0-11e5-a2cf-002590db3d35 ONLINE 0 0 0
gptid/6faacfb8-caa0-11e5-a2cf-002590db3d35 ONLINE 0 0 0
gptid/a86075cf-50b2-11e6-88c5-002590db3d35 ONLINE 0 0 0
replacing-7 DEGRADED 0 0 0
2938101774742790080 UNAVAIL 0 0 0 was /dev/gptid/e216a300-dfa5-11e5-a1df-002590db3d35
gptid/ac979e39-5f0f-11ea-b360-002590db3d35 ONLINE 0 0 0
gptid/721b320a-caa0-11e5-a2cf-002590db3d35 ONLINE 0 0 0
gptid/732f8318-caa0-11e5-a2cf-002590db3d35 ONLINE 0 0 0
errors: No known data errors
Can anyone see any issues here?
Or have any input or ideas
Cheers
Bill
(I resilvered a disk on another system last week and the same WD RED 6tb drive took about 12 hours)
My other system is
Supermicro MBD-X10SL7-F-O
Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz (4 cores)
RAM: 32GB DDR3 PC3-10600
LSI 2308 flash to IT mode
Disks: 10 x WD Red 6TB WD60EFAX (Raid z2)