This approach would probably work quite nicely, if there was a place to put the temperature probe so it gave a good indication of internal drive temperature. But, I've never seen a drive with a recess in which you could insert the probe. If you stick the probe against the outer surface of the drive, you'll be measuring some mix of outer case temperature and air flow temperature. It would also interfere with hot swapping drives, if your system has that capability (as mine does).Why would you bother with all this code?
Just install an auto PWM controller, about 12 bucks on ebay.
Shove the temp probe in hottest drive and flick a few toggles.
It can handle more than 10 high end fans.
It would be interesting to compare what the drive considers to be its temperature (via smartctl) with what the probe is reading.All drives have extra mount holes, just insert the probe in the hottest drive and its pretty accurate, I use velcro to seal the probe.
I checked the temp with a Fluke and the fan did spin up at aprox the right temp 35 C
Github repo, as requested.How about a github repo for this script?
What is the output ofHi, I tried the script ...... unfortunately, it seems to be getting the speed of my cpu fan very wrong.
...
The script starts and kicks the fan mode to full speed.
It seems to read the temperatures correctly or at least they look moderate.
However, it reads my cpu fan as running at 3100 or 3200 whereas I believe its maximum speed is 2500.
The script goes round and round, resetting BMC and the fans continue at max.
Can anyone give me some clues, please?
ipmitool sensor | grep FAN
, and which fan header is the CPU fan connected to?Hello
I had previously run:
root@NAS:/mnt/Storage/Scripts # /usr/local/bin/ipmitool sdr | grep FAN1
FAN1 | 1000 RPM | ok
root@NAS:/mnt/Storage/Scripts #
I'll try your suggestion tonight
The cpu fan is connected to FAN1
Thanks
What is the output ofipmitool sensor | grep FAN
, and which fan header is the CPU fan connected to?
You can also increase the Debug Level by editing the script, and then looking for clues in the debug log. Look for the line in the ##DEBUG LEVEL section to set that.
root@NAS:/mnt/Storage/Scripts # ipmitool sensor | grep FAN FAN1 | 1000.000 | RPM | ok | 600.000 | 700.000 | 800.000 | 2500.000 | 2600.000 | 2700.000 FAN2 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FAN3 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FAN4 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FANA | 800.000 | RPM | ok | 500.000 | 600.000 | 700.000 | 1300.000 | 1400.000 | 1500.000 root@NAS:/mnt/Storage/Scripts #
Your fans probably do spin up to 3200rpm and you might need to increase the fan thresholds
https://forums.freenas.org/index.php?threads/script-hybrid-cpu-hd-fan-zone-controller.46159/
root@NAS:/mnt/Storage/Scripts # ./PID_fan_control.pl 2018-10-03 20:29:09: ada0 ada1 ada2 ada3 ada4 ada5 ada6 ada7 da0 da1 2018-10-03 20:29:09: ada0 2018-10-03 20:29:09: ada1 2018-10-03 20:29:09: ada2 2018-10-03 20:29:09: ada3 2018-10-03 20:29:09: ada4 2018-10-03 20:29:09: ada5 2018-10-03 20:29:09: ada6 2018-10-03 20:29:09: ada7 2018-10-03 20:29:09: da0 2018-10-03 20:29:09: da1 2018-10-03 20:29:09: fanmode: full = 1 2018-10-03 20:29:09: Setting fan mode to 1 (full) 2018-10-03 20:29:15: core_temps: 37.0 37.0 29.0 29.0 2018-10-03 20:29:15: core_temp = 37.0 C 2018-10-03 20:29:15: core_temp = 37.0 C 2018-10-03 20:29:15: core_temp = 29.0 C 2018-10-03 20:29:15: core_temp = 29.0 C 2018-10-03 20:29:15: CPU Temp: 37.0 2018-10-03 20:29:15: CPU Temp: 37.0 dropped below 45, CPU Fan going med. 2018-10-03 20:29:15: CPU Fan: med 2018-10-03 20:29:15: CPU Fan changing... (med) 2018-10-03 20:29:15: Setting Zone 0 duty cycle to 75% 2018-10-03 20:29:15: ada0 ada1 ada2 ada3 ada4 ada5 ada6 ada7 da0 da1 2018-10-03 20:29:15: ada0 2018-10-03 20:29:15: ada1 2018-10-03 20:29:15: ada2 2018-10-03 20:29:15: ada3 2018-10-03 20:29:15: ada4 2018-10-03 20:29:15: ada5 2018-10-03 20:29:15: ada6 2018-10-03 20:29:15: ada7 2018-10-03 20:29:15: da0 2018-10-03 20:29:15: da1 2018-10-03 20:29:15: temperature error = -6.5 2018-10-03 20:29:15: PID corrections are P = -52, I = 0 and D = 3.33333333333333 2018-10-03 20:29:15: PID control new duty cycle is 31.3333333333333% 2018-10-03 20:29:15: Setting Zone 1 duty cycle to 31% 2018-10-03 20:29:16: core_temps: 28.0 30.0 33.0 33.0 2018-10-03 20:29:16: core_temp = 28.0 C 2018-10-03 20:29:16: core_temp = 30.0 C 2018-10-03 20:29:16: core_temp = 33.0 C 2018-10-03 20:29:16: core_temp = 33.0 C 2018-10-03 20:29:16: CPU Temp: 33.0 2018-10-03 20:29:17: core_temps: 27.0 27.0 28.0 28.0 2018-10-03 20:29:17: core_temp = 27.0 C 2018-10-03 20:29:17: core_temp = 27.0 C 2018-10-03 20:29:17: core_temp = 28.0 C 2018-10-03 20:29:17: core_temp = 28.0 C 2018-10-03 20:29:17: CPU Temp: 28.0 2018-10-03 20:29:17: CPU Temp: 28.0 <= 35, CPU Fan going low. 2018-10-03 20:29:17: CPU Fan: low 2018-10-03 20:29:17: CPU Fan changing... (low) 2018-10-03 20:29:17: Setting Zone 0 duty cycle to 40% 2018-10-03 20:29:18: core_temps: 28.0 28.0 28.0 28.0 2018-10-03 20:29:18: core_temp = 28.0 C 2018-10-03 20:29:18: core_temp = 28.0 C 2018-10-03 20:29:18: core_temp = 28.0 C 2018-10-03 20:29:18: core_temp = 28.0 C 2018-10-03 20:29:18: CPU Temp: 28.0 2018-10-03 20:29:18: CPU Fan: low 2018-10-03 20:29:19: core_temps: 29.0 29.0 28.0 28.0 2018-10-03 20:29:19: core_temp = 29.0 C 2018-10-03 20:29:19: core_temp = 29.0 C 2018-10-03 20:29:19: core_temp = 28.0 C 2018-10-03 20:29:19: core_temp = 28.0 C 2018-10-03 20:29:19: CPU Temp: 29.0 2018-10-03 20:29:19: CPU Fan: low 2018-10-03 20:29:20: core_temps: 29.0 29.0 28.0 28.0 2018-10-03 20:29:20: core_temp = 29.0 C 2018-10-03 20:29:20: core_temp = 29.0 C 2018-10-03 20:29:20: core_temp = 28.0 C 2018-10-03 20:29:20: core_temp = 28.0 C 2018-10-03 20:29:20: CPU Temp: 29.0 2018-10-03 20:29:20: CPU Fan: low 2018-10-03 20:29:21: core_temps: 27.0 28.0 28.0 28.0 2018-10-03 20:29:21: core_temp = 27.0 C 2018-10-03 20:29:21: core_temp = 28.0 C 2018-10-03 20:29:21: core_temp = 28.0 C 2018-10-03 20:29:21: core_temp = 28.0 C 2018-10-03 20:29:21: CPU Temp: 28.0 2018-10-03 20:29:21: CPU Fan: low 2018-10-03 20:29:22: core_temps: 28.0 28.0 27.0 29.0 2018-10-03 20:29:22: core_temp = 28.0 C 2018-10-03 20:29:22: core_temp = 28.0 C 2018-10-03 20:29:22: core_temp = 27.0 C 2018-10-03 20:29:22: core_temp = 29.0 C 2018-10-03 20:29:22: CPU Temp: 29.0 2018-10-03 20:29:22: CPU Fan: low 2018-10-03 20:29:23: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:29:23: core_temp = 29.0 C 2018-10-03 20:29:23: core_temp = 29.0 C 2018-10-03 20:29:23: core_temp = 27.0 C 2018-10-03 20:29:23: core_temp = 27.0 C 2018-10-03 20:29:23: CPU Temp: 29.0 2018-10-03 20:29:23: CPU Fan: low 2018-10-03 20:29:24: core_temps: 29.0 29.0 28.0 28.0 2018-10-03 20:29:24: core_temp = 29.0 C 2018-10-03 20:29:24: core_temp = 29.0 C 2018-10-03 20:29:24: core_temp = 28.0 C 2018-10-03 20:29:24: core_temp = 28.0 C 2018-10-03 20:29:24: CPU Temp: 29.0 2018-10-03 20:29:24: CPU Fan: low 2018-10-03 20:29:25: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:29:25: core_temp = 29.0 C 2018-10-03 20:29:25: core_temp = 29.0 C 2018-10-03 20:29:25: core_temp = 27.0 C 2018-10-03 20:29:25: core_temp = 27.0 C 2018-10-03 20:29:25: CPU Temp: 29.0 2018-10-03 20:29:25: CPU Fan: low 2018-10-03 20:29:26: core_temps: 30.0 30.0 28.0 28.0 2018-10-03 20:29:26: core_temp = 30.0 C 2018-10-03 20:29:26: core_temp = 30.0 C 2018-10-03 20:29:26: core_temp = 28.0 C 2018-10-03 20:29:26: core_temp = 28.0 C 2018-10-03 20:29:26: CPU Temp: 30.0 2018-10-03 20:29:26: CPU Fan: low 2018-10-03 20:29:27: core_temps: 30.0 30.0 28.0 28.0 2018-10-03 20:29:27: core_temp = 30.0 C 2018-10-03 20:29:27: core_temp = 30.0 C 2018-10-03 20:29:27: core_temp = 28.0 C 2018-10-03 20:29:27: core_temp = 28.0 C 2018-10-03 20:29:27: CPU Temp: 30.0 2018-10-03 20:29:27: CPU Fan: low 2018-10-03 20:29:28: core_temps: 28.0 28.0 29.0 29.0 2018-10-03 20:29:28: core_temp = 28.0 C 2018-10-03 20:29:28: core_temp = 28.0 C 2018-10-03 20:29:28: core_temp = 29.0 C 2018-10-03 20:29:28: core_temp = 29.0 C 2018-10-03 20:29:28: CPU Temp: 29.0 2018-10-03 20:29:28: CPU Fan: low 2018-10-03 20:29:29: fan_speed = 3100 2018-10-03 20:29:29: CPU Fan speed: 3100 RPM 2018-10-03 20:29:29: fan_speed = 1100 2018-10-03 20:29:29: HD Fan speed: 1100 RPM 2018-10-03 20:29:29: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:29:29: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-10-03 20:29:29: Fan speeds are not where they should be, will try again. 2018-10-03 20:29:29: fanmode: full = 1 2018-10-03 20:29:29: Setting fan mode to 1 (full) 2018-10-03 20:29:34: Setting Zone 0 duty cycle to 40% 2018-10-03 20:29:34: Setting Zone 1 duty cycle to 31% 2018-10-03 20:29:35: core_temps: 28.0 29.0 27.0 27.0 2018-10-03 20:29:35: core_temp = 28.0 C 2018-10-03 20:29:35: core_temp = 29.0 C 2018-10-03 20:29:35: core_temp = 27.0 C 2018-10-03 20:29:35: core_temp = 27.0 C 2018-10-03 20:29:35: CPU Temp: 29.0 2018-10-03 20:29:35: CPU Fan: low 2018-10-03 20:29:36: core_temps: 28.0 28.0 28.0 29.0 2018-10-03 20:29:36: core_temp = 28.0 C 2018-10-03 20:29:36: core_temp = 28.0 C 2018-10-03 20:29:36: core_temp = 28.0 C 2018-10-03 20:29:36: core_temp = 29.0 C 2018-10-03 20:29:36: CPU Temp: 29.0 2018-10-03 20:29:36: CPU Fan: low 2018-10-03 20:29:37: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:29:37: core_temp = 28.0 C 2018-10-03 20:29:37: core_temp = 28.0 C 2018-10-03 20:29:37: core_temp = 27.0 C 2018-10-03 20:29:37: core_temp = 27.0 C 2018-10-03 20:29:37: CPU Temp: 28.0 2018-10-03 20:29:37: CPU Fan: low 2018-10-03 20:29:38: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:29:38: core_temp = 29.0 C 2018-10-03 20:29:38: core_temp = 29.0 C 2018-10-03 20:29:38: core_temp = 27.0 C 2018-10-03 20:29:38: core_temp = 27.0 C 2018-10-03 20:29:38: CPU Temp: 29.0 2018-10-03 20:29:38: CPU Fan: low 2018-10-03 20:29:39: core_temps: 28.0 30.0 28.0 28.0 2018-10-03 20:29:39: core_temp = 28.0 C 2018-10-03 20:29:39: core_temp = 30.0 C 2018-10-03 20:29:39: core_temp = 28.0 C 2018-10-03 20:29:39: core_temp = 28.0 C 2018-10-03 20:29:39: CPU Temp: 30.0 2018-10-03 20:29:39: CPU Fan: low 2018-10-03 20:29:41: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:29:41: core_temp = 28.0 C 2018-10-03 20:29:41: core_temp = 28.0 C 2018-10-03 20:29:41: core_temp = 27.0 C 2018-10-03 20:29:41: core_temp = 27.0 C 2018-10-03 20:29:41: CPU Temp: 28.0 2018-10-03 20:29:41: CPU Fan: low 2018-10-03 20:29:42: core_temps: 29.0 29.0 26.0 27.0 2018-10-03 20:29:42: core_temp = 29.0 C 2018-10-03 20:29:42: core_temp = 29.0 C 2018-10-03 20:29:42: core_temp = 26.0 C 2018-10-03 20:29:42: core_temp = 27.0 C 2018-10-03 20:29:42: CPU Temp: 29.0 2018-10-03 20:29:42: CPU Fan: low 2018-10-03 20:29:43: core_temps: 28.0 28.0 26.0 27.0 2018-10-03 20:29:43: core_temp = 28.0 C 2018-10-03 20:29:43: core_temp = 28.0 C 2018-10-03 20:29:43: core_temp = 26.0 C 2018-10-03 20:29:43: core_temp = 27.0 C 2018-10-03 20:29:43: CPU Temp: 28.0 2018-10-03 20:29:43: CPU Fan: low 2018-10-03 20:29:44: core_temps: 29.0 29.0 28.0 28.0 2018-10-03 20:29:44: core_temp = 29.0 C 2018-10-03 20:29:44: core_temp = 29.0 C 2018-10-03 20:29:44: core_temp = 28.0 C 2018-10-03 20:29:44: core_temp = 28.0 C 2018-10-03 20:29:44: CPU Temp: 29.0 2018-10-03 20:29:44: CPU Fan: low 2018-10-03 20:29:45: core_temps: 27.0 27.0 28.0 28.0 2018-10-03 20:29:45: core_temp = 27.0 C 2018-10-03 20:29:45: core_temp = 27.0 C 2018-10-03 20:29:45: core_temp = 28.0 C 2018-10-03 20:29:45: core_temp = 28.0 C 2018-10-03 20:29:45: CPU Temp: 28.0 2018-10-03 20:29:45: CPU Fan: low 2018-10-03 20:29:45: fan_speed = 3100 2018-10-03 20:29:45: CPU Fan speed: 3100 RPM 2018-10-03 20:29:46: fan_speed = 1100 2018-10-03 20:29:46: HD Fan speed: 1100 RPM 2018-10-03 20:29:46: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:29:46: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-10-03 20:29:46: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-10-03 20:29:46: fanmode: full = 1 2018-10-03 20:29:46: Setting fan mode to 1 (full) 2018-10-03 20:29:51: Resetting BMC 2018-10-03 20:29:52: core_temps: 28.0 28.0 26.0 27.0 2018-10-03 20:29:52: core_temp = 28.0 C 2018-10-03 20:29:52: core_temp = 28.0 C 2018-10-03 20:29:52: core_temp = 26.0 C 2018-10-03 20:29:52: core_temp = 27.0 C 2018-10-03 20:29:52: CPU Temp: 28.0 2018-10-03 20:29:52: CPU Fan: low 2018-10-03 20:29:53: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:29:53: core_temp = 28.0 C 2018-10-03 20:29:53: core_temp = 28.0 C 2018-10-03 20:29:53: core_temp = 27.0 C 2018-10-03 20:29:53: core_temp = 27.0 C 2018-10-03 20:29:53: CPU Temp: 28.0 2018-10-03 20:29:53: CPU Fan: low 2018-10-03 20:29:54: core_temps: 28.0 28.0 28.0 28.0 2018-10-03 20:29:54: core_temp = 28.0 C 2018-10-03 20:29:54: core_temp = 28.0 C 2018-10-03 20:29:54: core_temp = 28.0 C 2018-10-03 20:29:54: core_temp = 28.0 C 2018-10-03 20:29:54: CPU Temp: 28.0 2018-10-03 20:29:54: CPU Fan: low 2018-10-03 20:29:55: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:29:55: core_temp = 28.0 C 2018-10-03 20:29:55: core_temp = 28.0 C 2018-10-03 20:29:55: core_temp = 27.0 C 2018-10-03 20:29:55: core_temp = 27.0 C 2018-10-03 20:29:55: CPU Temp: 28.0 2018-10-03 20:29:55: CPU Fan: low 2018-10-03 20:29:56: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:29:56: core_temp = 28.0 C 2018-10-03 20:29:56: core_temp = 28.0 C 2018-10-03 20:29:56: core_temp = 27.0 C 2018-10-03 20:29:56: core_temp = 27.0 C 2018-10-03 20:29:56: CPU Temp: 28.0 2018-10-03 20:29:56: CPU Fan: low 2018-10-03 20:29:57: core_temps: 27.0 29.0 28.0 28.0 2018-10-03 20:29:57: core_temp = 27.0 C 2018-10-03 20:29:57: core_temp = 29.0 C 2018-10-03 20:29:57: core_temp = 28.0 C 2018-10-03 20:29:57: core_temp = 28.0 C 2018-10-03 20:29:57: CPU Temp: 29.0 2018-10-03 20:29:57: CPU Fan: low 2018-10-03 20:29:58: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:29:58: core_temp = 28.0 C 2018-10-03 20:29:58: core_temp = 28.0 C 2018-10-03 20:29:58: core_temp = 27.0 C 2018-10-03 20:29:58: core_temp = 27.0 C 2018-10-03 20:29:58: CPU Temp: 28.0 2018-10-03 20:29:58: CPU Fan: low 2018-10-03 20:29:59: core_temps: 28.0 28.0 26.0 27.0 2018-10-03 20:29:59: core_temp = 28.0 C 2018-10-03 20:29:59: core_temp = 28.0 C 2018-10-03 20:29:59: core_temp = 26.0 C 2018-10-03 20:29:59: core_temp = 27.0 C 2018-10-03 20:29:59: CPU Temp: 28.0 2018-10-03 20:29:59: CPU Fan: low 2018-10-03 20:30:00: core_temps: 27.0 28.0 28.0 28.0 2018-10-03 20:30:00: core_temp = 27.0 C 2018-10-03 20:30:00: core_temp = 28.0 C 2018-10-03 20:30:00: core_temp = 28.0 C 2018-10-03 20:30:00: core_temp = 28.0 C 2018-10-03 20:30:00: CPU Temp: 28.0 2018-10-03 20:30:00: CPU Fan: low 2018-10-03 20:30:01: core_temps: 28.0 28.0 26.0 27.0 2018-10-03 20:30:01: core_temp = 28.0 C 2018-10-03 20:30:01: core_temp = 28.0 C 2018-10-03 20:30:01: core_temp = 26.0 C 2018-10-03 20:30:01: core_temp = 27.0 C 2018-10-03 20:30:01: CPU Temp: 28.0 2018-10-03 20:30:01: CPU Fan: low 2018-10-03 20:30:02: core_temps: 28.0 28.0 26.0 26.0 2018-10-03 20:30:02: core_temp = 28.0 C 2018-10-03 20:30:02: core_temp = 28.0 C 2018-10-03 20:30:02: core_temp = 26.0 C 2018-10-03 20:30:02: core_temp = 26.0 C 2018-10-03 20:30:02: CPU Temp: 28.0 2018-10-03 20:30:02: CPU Fan: low 2018-10-03 20:30:02: fan_speed = 3100 2018-10-03 20:30:02: CPU Fan speed: 3100 RPM 2018-10-03 20:30:03: fan_speed = 1100 2018-10-03 20:30:03: HD Fan speed: 1100 RPM 2018-10-03 20:30:03: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:30:03: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-10-03 20:30:03: Fan speeds are not where they should be, will try again. 2018-10-03 20:30:03: fanmode: full = 1 2018-10-03 20:30:03: Setting fan mode to 1 (full) 2018-10-03 20:30:08: Setting Zone 0 duty cycle to 40% 2018-10-03 20:30:08: Setting Zone 1 duty cycle to 31% 2018-10-03 20:30:09: core_temps: 29.0 29.0 26.0 26.0 2018-10-03 20:30:09: core_temp = 29.0 C 2018-10-03 20:30:09: core_temp = 29.0 C 2018-10-03 20:30:09: core_temp = 26.0 C 2018-10-03 20:30:09: core_temp = 26.0 C 2018-10-03 20:30:09: CPU Temp: 29.0 2018-10-03 20:30:09: CPU Fan: low 2018-10-03 20:30:10: core_temps: 27.0 29.0 27.0 27.0 2018-10-03 20:30:10: core_temp = 27.0 C 2018-10-03 20:30:10: core_temp = 29.0 C 2018-10-03 20:30:10: core_temp = 27.0 C 2018-10-03 20:30:10: core_temp = 27.0 C 2018-10-03 20:30:10: CPU Temp: 29.0 2018-10-03 20:30:10: CPU Fan: low 2018-10-03 20:30:11: core_temps: 27.0 27.0 27.0 27.0 2018-10-03 20:30:11: core_temp = 27.0 C 2018-10-03 20:30:11: core_temp = 27.0 C 2018-10-03 20:30:11: core_temp = 27.0 C 2018-10-03 20:30:11: core_temp = 27.0 C 2018-10-03 20:30:11: CPU Temp: 27.0 2018-10-03 20:30:11: CPU Fan: low 2018-10-03 20:30:12: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:12: core_temp = 28.0 C 2018-10-03 20:30:12: core_temp = 28.0 C 2018-10-03 20:30:12: core_temp = 27.0 C 2018-10-03 20:30:12: core_temp = 27.0 C 2018-10-03 20:30:12: CPU Temp: 28.0 2018-10-03 20:30:12: CPU Fan: low 2018-10-03 20:30:13: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:13: core_temp = 28.0 C 2018-10-03 20:30:13: core_temp = 28.0 C 2018-10-03 20:30:13: core_temp = 27.0 C 2018-10-03 20:30:13: core_temp = 27.0 C 2018-10-03 20:30:13: CPU Temp: 28.0 2018-10-03 20:30:13: CPU Fan: low 2018-10-03 20:30:14: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:14: core_temp = 28.0 C 2018-10-03 20:30:14: core_temp = 28.0 C 2018-10-03 20:30:14: core_temp = 27.0 C 2018-10-03 20:30:14: core_temp = 27.0 C 2018-10-03 20:30:14: CPU Temp: 28.0 2018-10-03 20:30:14: CPU Fan: low 2018-10-03 20:30:15: core_temps: 28.0 28.0 25.0 25.0 2018-10-03 20:30:15: core_temp = 28.0 C 2018-10-03 20:30:15: core_temp = 28.0 C 2018-10-03 20:30:15: core_temp = 25.0 C 2018-10-03 20:30:15: core_temp = 25.0 C 2018-10-03 20:30:15: CPU Temp: 28.0 2018-10-03 20:30:15: CPU Fan: low 2018-10-03 20:30:16: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:16: core_temp = 28.0 C 2018-10-03 20:30:16: core_temp = 28.0 C 2018-10-03 20:30:16: core_temp = 27.0 C 2018-10-03 20:30:16: core_temp = 27.0 C 2018-10-03 20:30:16: CPU Temp: 28.0 2018-10-03 20:30:16: CPU Fan: low 2018-10-03 20:30:17: core_temps: 28.0 28.0 26.0 26.0 2018-10-03 20:30:17: core_temp = 28.0 C 2018-10-03 20:30:17: core_temp = 28.0 C 2018-10-03 20:30:17: core_temp = 26.0 C 2018-10-03 20:30:17: core_temp = 26.0 C 2018-10-03 20:30:17: CPU Temp: 28.0 2018-10-03 20:30:17: CPU Fan: low 2018-10-03 20:30:18: core_temps: 28.0 28.0 27.0 28.0 2018-10-03 20:30:18: core_temp = 28.0 C 2018-10-03 20:30:18: core_temp = 28.0 C 2018-10-03 20:30:18: core_temp = 27.0 C 2018-10-03 20:30:18: core_temp = 28.0 C 2018-10-03 20:30:18: CPU Temp: 28.0 2018-10-03 20:30:18: CPU Fan: low 2018-10-03 20:30:19: core_temps: 26.0 28.0 27.0 27.0 2018-10-03 20:30:19: core_temp = 26.0 C 2018-10-03 20:30:19: core_temp = 28.0 C 2018-10-03 20:30:19: core_temp = 27.0 C 2018-10-03 20:30:19: core_temp = 27.0 C 2018-10-03 20:30:19: CPU Temp: 28.0 2018-10-03 20:30:19: CPU Fan: low 2018-10-03 20:30:20: fan_speed = 3100 2018-10-03 20:30:20: CPU Fan speed: 3100 RPM 2018-10-03 20:30:20: fan_speed = 1100 2018-10-03 20:30:20: HD Fan speed: 1100 RPM 2018-10-03 20:30:20: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:30:20: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-10-03 20:30:20: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-10-03 20:30:20: fanmode: full = 1 2018-10-03 20:30:20: Setting fan mode to 1 (full) 2018-10-03 20:30:25: Resetting BMC 2018-10-03 20:30:26: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:26: core_temp = 29.0 C 2018-10-03 20:30:26: core_temp = 29.0 C 2018-10-03 20:30:26: core_temp = 27.0 C 2018-10-03 20:30:26: core_temp = 27.0 C 2018-10-03 20:30:26: CPU Temp: 29.0 2018-10-03 20:30:26: CPU Fan: low 2018-10-03 20:30:27: core_temps: 27.0 28.0 27.0 27.0 2018-10-03 20:30:27: core_temp = 27.0 C 2018-10-03 20:30:27: core_temp = 28.0 C 2018-10-03 20:30:27: core_temp = 27.0 C 2018-10-03 20:30:27: core_temp = 27.0 C 2018-10-03 20:30:27: CPU Temp: 28.0 2018-10-03 20:30:27: CPU Fan: low 2018-10-03 20:30:28: core_temps: 29.0 29.0 26.0 26.0 2018-10-03 20:30:28: core_temp = 29.0 C 2018-10-03 20:30:28: core_temp = 29.0 C 2018-10-03 20:30:28: core_temp = 26.0 C 2018-10-03 20:30:28: core_temp = 26.0 C 2018-10-03 20:30:28: CPU Temp: 29.0 2018-10-03 20:30:28: CPU Fan: low 2018-10-03 20:30:29: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:29: core_temp = 29.0 C 2018-10-03 20:30:29: core_temp = 29.0 C 2018-10-03 20:30:29: core_temp = 27.0 C 2018-10-03 20:30:29: core_temp = 27.0 C 2018-10-03 20:30:29: CPU Temp: 29.0 2018-10-03 20:30:29: CPU Fan: low 2018-10-03 20:30:30: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:30: core_temp = 29.0 C 2018-10-03 20:30:30: core_temp = 29.0 C 2018-10-03 20:30:30: core_temp = 27.0 C 2018-10-03 20:30:30: core_temp = 27.0 C 2018-10-03 20:30:30: CPU Temp: 29.0 2018-10-03 20:30:30: CPU Fan: low 2018-10-03 20:30:31: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:31: core_temp = 28.0 C 2018-10-03 20:30:31: core_temp = 28.0 C 2018-10-03 20:30:31: core_temp = 27.0 C 2018-10-03 20:30:31: core_temp = 27.0 C 2018-10-03 20:30:31: CPU Temp: 28.0 2018-10-03 20:30:31: CPU Fan: low 2018-10-03 20:30:32: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:32: core_temp = 29.0 C 2018-10-03 20:30:32: core_temp = 29.0 C 2018-10-03 20:30:32: core_temp = 27.0 C 2018-10-03 20:30:32: core_temp = 27.0 C 2018-10-03 20:30:32: CPU Temp: 29.0 2018-10-03 20:30:32: CPU Fan: low 2018-10-03 20:30:33: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:33: core_temp = 29.0 C 2018-10-03 20:30:33: core_temp = 29.0 C 2018-10-03 20:30:33: core_temp = 27.0 C 2018-10-03 20:30:33: core_temp = 27.0 C 2018-10-03 20:30:33: CPU Temp: 29.0 2018-10-03 20:30:33: CPU Fan: low 2018-10-03 20:30:34: core_temps: 27.0 27.0 26.0 27.0 2018-10-03 20:30:34: core_temp = 27.0 C 2018-10-03 20:30:34: core_temp = 27.0 C 2018-10-03 20:30:34: core_temp = 26.0 C 2018-10-03 20:30:34: core_temp = 27.0 C 2018-10-03 20:30:34: CPU Temp: 27.0 2018-10-03 20:30:34: CPU Fan: low 2018-10-03 20:30:35: core_temps: 28.0 28.0 26.0 26.0 2018-10-03 20:30:35: core_temp = 28.0 C 2018-10-03 20:30:35: core_temp = 28.0 C 2018-10-03 20:30:35: core_temp = 26.0 C 2018-10-03 20:30:35: core_temp = 26.0 C 2018-10-03 20:30:35: CPU Temp: 28.0 2018-10-03 20:30:35: CPU Fan: low 2018-10-03 20:30:36: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:36: core_temp = 28.0 C 2018-10-03 20:30:36: core_temp = 28.0 C 2018-10-03 20:30:36: core_temp = 27.0 C 2018-10-03 20:30:36: core_temp = 27.0 C 2018-10-03 20:30:36: CPU Temp: 28.0 2018-10-03 20:30:36: CPU Fan: low 2018-10-03 20:30:37: fan_speed = 3100 2018-10-03 20:30:37: CPU Fan speed: 3100 RPM 2018-10-03 20:30:37: fan_speed = 1100 2018-10-03 20:30:37: HD Fan speed: 1100 RPM 2018-10-03 20:30:37: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:30:37: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-10-03 20:30:37: Fan speeds are not where they should be, will try again. 2018-10-03 20:30:37: fanmode: full = 1 2018-10-03 20:30:37: Setting fan mode to 1 (full) 2018-10-03 20:30:42: Setting Zone 0 duty cycle to 40% 2018-10-03 20:30:42: Setting Zone 1 duty cycle to 31% 2018-10-03 20:30:43: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:43: core_temp = 28.0 C 2018-10-03 20:30:43: core_temp = 28.0 C 2018-10-03 20:30:43: core_temp = 27.0 C 2018-10-03 20:30:43: core_temp = 27.0 C 2018-10-03 20:30:43: CPU Temp: 28.0 2018-10-03 20:30:43: CPU Fan: low 2018-10-03 20:30:44: core_temps: 27.0 28.0 28.0 28.0 2018-10-03 20:30:44: core_temp = 27.0 C 2018-10-03 20:30:44: core_temp = 28.0 C 2018-10-03 20:30:44: core_temp = 28.0 C 2018-10-03 20:30:44: core_temp = 28.0 C 2018-10-03 20:30:44: CPU Temp: 28.0 2018-10-03 20:30:44: CPU Fan: low 2018-10-03 20:30:46: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:46: core_temp = 28.0 C 2018-10-03 20:30:46: core_temp = 28.0 C 2018-10-03 20:30:46: core_temp = 27.0 C 2018-10-03 20:30:46: core_temp = 27.0 C 2018-10-03 20:30:46: CPU Temp: 28.0 2018-10-03 20:30:46: CPU Fan: low 2018-10-03 20:30:47: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:30:47: core_temp = 28.0 C 2018-10-03 20:30:47: core_temp = 28.0 C 2018-10-03 20:30:47: core_temp = 27.0 C 2018-10-03 20:30:47: core_temp = 27.0 C 2018-10-03 20:30:47: CPU Temp: 28.0 2018-10-03 20:30:47: CPU Fan: low 2018-10-03 20:30:48: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:48: core_temp = 29.0 C 2018-10-03 20:30:48: core_temp = 29.0 C 2018-10-03 20:30:48: core_temp = 27.0 C 2018-10-03 20:30:48: core_temp = 27.0 C 2018-10-03 20:30:48: CPU Temp: 29.0 2018-10-03 20:30:48: CPU Fan: low 2018-10-03 20:30:49: core_temps: 28.0 28.0 27.0 28.0 2018-10-03 20:30:49: core_temp = 28.0 C 2018-10-03 20:30:49: core_temp = 28.0 C 2018-10-03 20:30:49: core_temp = 27.0 C 2018-10-03 20:30:49: core_temp = 28.0 C 2018-10-03 20:30:49: CPU Temp: 28.0 2018-10-03 20:30:49: CPU Fan: low 2018-10-03 20:30:50: core_temps: 29.0 29.0 26.0 26.0 2018-10-03 20:30:50: core_temp = 29.0 C 2018-10-03 20:30:50: core_temp = 29.0 C 2018-10-03 20:30:50: core_temp = 26.0 C 2018-10-03 20:30:50: core_temp = 26.0 C 2018-10-03 20:30:50: CPU Temp: 29.0 2018-10-03 20:30:50: CPU Fan: low 2018-10-03 20:30:51: core_temps: 29.0 29.0 27.0 27.0 2018-10-03 20:30:51: core_temp = 29.0 C 2018-10-03 20:30:51: core_temp = 29.0 C 2018-10-03 20:30:51: core_temp = 27.0 C 2018-10-03 20:30:51: core_temp = 27.0 C 2018-10-03 20:30:51: CPU Temp: 29.0 2018-10-03 20:30:51: CPU Fan: low 2018-10-03 20:30:52: core_temps: 27.0 27.0 27.0 27.0 2018-10-03 20:30:52: core_temp = 27.0 C 2018-10-03 20:30:52: core_temp = 27.0 C 2018-10-03 20:30:52: core_temp = 27.0 C 2018-10-03 20:30:52: core_temp = 27.0 C 2018-10-03 20:30:52: CPU Temp: 27.0 2018-10-03 20:30:52: CPU Fan: low 2018-10-03 20:30:53: core_temps: 29.0 29.0 26.0 26.0 2018-10-03 20:30:53: core_temp = 29.0 C 2018-10-03 20:30:53: core_temp = 29.0 C 2018-10-03 20:30:53: core_temp = 26.0 C 2018-10-03 20:30:53: core_temp = 26.0 C 2018-10-03 20:30:53: CPU Temp: 29.0 2018-10-03 20:30:53: CPU Fan: low 2018-10-03 20:30:53: fan_speed = 3100 2018-10-03 20:30:53: CPU Fan speed: 3100 RPM 2018-10-03 20:30:54: fan_speed = 1100 2018-10-03 20:30:54: HD Fan speed: 1100 RPM 2018-10-03 20:30:54: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:30:54: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-10-03 20:30:54: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-10-03 20:30:54: fanmode: full = 1 2018-10-03 20:30:54: Setting fan mode to 1 (full) 2018-10-03 20:30:59: Resetting BMC 2018-10-03 20:31:00: core_temps: 29.0 29.0 36.0 36.0 2018-10-03 20:31:00: core_temp = 29.0 C 2018-10-03 20:31:00: core_temp = 29.0 C 2018-10-03 20:31:00: core_temp = 36.0 C 2018-10-03 20:31:00: core_temp = 36.0 C 2018-10-03 20:31:00: CPU Temp: 36.0 2018-10-03 20:31:00: CPU Fan: low 2018-10-03 20:31:01: core_temps: 30.0 30.0 36.0 36.0 2018-10-03 20:31:01: core_temp = 30.0 C 2018-10-03 20:31:01: core_temp = 30.0 C 2018-10-03 20:31:01: core_temp = 36.0 C 2018-10-03 20:31:01: core_temp = 36.0 C 2018-10-03 20:31:01: CPU Temp: 36.0 2018-10-03 20:31:01: CPU Fan: low 2018-10-03 20:31:02: core_temps: 28.0 28.0 28.0 28.0 2018-10-03 20:31:02: core_temp = 28.0 C 2018-10-03 20:31:02: core_temp = 28.0 C 2018-10-03 20:31:02: core_temp = 28.0 C 2018-10-03 20:31:02: core_temp = 28.0 C 2018-10-03 20:31:02: CPU Temp: 28.0 2018-10-03 20:31:02: CPU Fan: low 2018-10-03 20:31:03: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:31:03: core_temp = 28.0 C 2018-10-03 20:31:03: core_temp = 28.0 C 2018-10-03 20:31:03: core_temp = 27.0 C 2018-10-03 20:31:03: core_temp = 27.0 C 2018-10-03 20:31:03: CPU Temp: 28.0 2018-10-03 20:31:03: CPU Fan: low 2018-10-03 20:31:04: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:31:04: core_temp = 28.0 C 2018-10-03 20:31:04: core_temp = 28.0 C 2018-10-03 20:31:04: core_temp = 27.0 C 2018-10-03 20:31:04: core_temp = 27.0 C 2018-10-03 20:31:04: CPU Temp: 28.0 2018-10-03 20:31:04: CPU Fan: low 2018-10-03 20:31:05: core_temps: 28.0 28.0 28.0 28.0 2018-10-03 20:31:05: core_temp = 28.0 C 2018-10-03 20:31:05: core_temp = 28.0 C 2018-10-03 20:31:05: core_temp = 28.0 C 2018-10-03 20:31:05: core_temp = 28.0 C 2018-10-03 20:31:05: CPU Temp: 28.0 2018-10-03 20:31:05: CPU Fan: low 2018-10-03 20:31:06: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:31:06: core_temp = 28.0 C 2018-10-03 20:31:06: core_temp = 28.0 C 2018-10-03 20:31:06: core_temp = 27.0 C 2018-10-03 20:31:06: core_temp = 27.0 C 2018-10-03 20:31:06: CPU Temp: 28.0 2018-10-03 20:31:06: CPU Fan: low 2018-10-03 20:31:07: core_temps: 29.0 29.0 25.0 25.0 2018-10-03 20:31:07: core_temp = 29.0 C 2018-10-03 20:31:07: core_temp = 29.0 C 2018-10-03 20:31:07: core_temp = 25.0 C 2018-10-03 20:31:07: core_temp = 25.0 C 2018-10-03 20:31:07: CPU Temp: 29.0 2018-10-03 20:31:07: CPU Fan: low 2018-10-03 20:31:08: core_temps: 29.0 29.0 26.0 26.0 2018-10-03 20:31:08: core_temp = 29.0 C 2018-10-03 20:31:08: core_temp = 29.0 C 2018-10-03 20:31:08: core_temp = 26.0 C 2018-10-03 20:31:08: core_temp = 26.0 C 2018-10-03 20:31:08: CPU Temp: 29.0 2018-10-03 20:31:08: CPU Fan: low 2018-10-03 20:31:09: core_temps: 28.0 28.0 26.0 28.0 2018-10-03 20:31:09: core_temp = 28.0 C 2018-10-03 20:31:09: core_temp = 28.0 C 2018-10-03 20:31:09: core_temp = 26.0 C 2018-10-03 20:31:09: core_temp = 28.0 C 2018-10-03 20:31:09: CPU Temp: 28.0 2018-10-03 20:31:09: CPU Fan: low 2018-10-03 20:31:10: core_temps: 27.0 27.0 27.0 27.0 2018-10-03 20:31:10: core_temp = 27.0 C 2018-10-03 20:31:10: core_temp = 27.0 C 2018-10-03 20:31:10: core_temp = 27.0 C 2018-10-03 20:31:10: core_temp = 27.0 C 2018-10-03 20:31:10: CPU Temp: 27.0 2018-10-03 20:31:10: CPU Fan: low 2018-10-03 20:31:11: fan_speed = 3100 2018-10-03 20:31:11: CPU Fan speed: 3100 RPM 2018-10-03 20:31:11: fan_speed = 1100 2018-10-03 20:31:11: HD Fan speed: 1100 RPM 2018-10-03 20:31:11: CPU fan speed should be low, but 3100 > 2000. 2018-10-03 20:31:11: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-10-03 20:31:11: Fan speeds are not where they should be, will try again. 2018-10-03 20:31:11: fanmode: full = 1 2018-10-03 20:31:11: Setting fan mode to 1 (full) 2018-10-03 20:31:16: Setting Zone 0 duty cycle to 40% 2018-10-03 20:31:16: Setting Zone 1 duty cycle to 31% 2018-10-03 20:31:17: core_temps: 29.0 29.0 26.0 26.0 2018-10-03 20:31:17: core_temp = 29.0 C 2018-10-03 20:31:17: core_temp = 29.0 C 2018-10-03 20:31:17: core_temp = 26.0 C 2018-10-03 20:31:17: core_temp = 26.0 C 2018-10-03 20:31:17: CPU Temp: 29.0 2018-10-03 20:31:17: CPU Fan: low 2018-10-03 20:31:18: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:31:18: core_temp = 28.0 C 2018-10-03 20:31:18: core_temp = 28.0 C 2018-10-03 20:31:18: core_temp = 27.0 C 2018-10-03 20:31:18: core_temp = 27.0 C 2018-10-03 20:31:18: CPU Temp: 28.0 2018-10-03 20:31:18: CPU Fan: low 2018-10-03 20:31:19: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:31:19: core_temp = 28.0 C 2018-10-03 20:31:19: core_temp = 28.0 C 2018-10-03 20:31:19: core_temp = 27.0 C 2018-10-03 20:31:19: core_temp = 27.0 C 2018-10-03 20:31:19: CPU Temp: 28.0 2018-10-03 20:31:19: CPU Fan: low 2018-10-03 20:31:20: core_temps: 28.0 28.0 26.0 26.0 2018-10-03 20:31:20: core_temp = 28.0 C 2018-10-03 20:31:20: core_temp = 28.0 C 2018-10-03 20:31:20: core_temp = 26.0 C 2018-10-03 20:31:20: core_temp = 26.0 C 2018-10-03 20:31:20: CPU Temp: 28.0 2018-10-03 20:31:20: CPU Fan: low 2018-10-03 20:31:21: core_temps: 28.0 28.0 27.0 27.0 2018-10-03 20:31:21: core_temp = 28.0 C 2018-10-03 20:31:21: core_temp = 28.0 C 2018-10-03 20:31:21: core_temp = 27.0 C 2018-10-03 20:31:21: core_temp = 27.0 C 2018-10-03 20:31:21: CPU Temp: 28.0 2018-10-03 20:31:21: CPU Fan: low ^C root@NAS:/mnt/Storage/Scripts #
I missed your response on the 3rd. Sorry about that.@Kevin Horton Unfortunately, I do not know enough about the script to get any further. Can you help, please?
I missed your response on the 3rd. Sorry about that.
The script seems to be picking up the wrong CPU fan rpm. The question is why.
One possibility: Search in your copy of the script for a line that starts with:
$cpu_fan_header =
Confirm that you have FAN1 specified there. If not, change it and let us know if that helps. If not, report back and I'll dig some more.
I use 0 RPM for the lowest thresholds with my Noctuas.I wonder if the CPU fan speed may occasionally go too low, below the lower thresholds. In that case the BMC would likely set it to full speed. Then the script would detect the fan was at the wrong speed, and reset the BMC. Try lowering the FAN1 thresholds to lower values.
Sorry chaps, for some reason I didn't get a prompt that you had posted.I wonder if the CPU fan speed may occasionally go too low, below the lower thresholds. In that case the BMC would likely set it to full speed. Then the script would detect the fan was at the wrong speed, and reset the BMC. Try lowering the FAN1 thresholds to lower values.
root@NAS:/mnt/Storage/Scripts # ipmitool sensor thresh FAN1 lower 0 100 200 Locating sensor record 'FAN1'... Setting sensor "FAN1" Lower Non-Recoverable threshold to 0.000 Setting sensor "FAN1" Lower Critical threshold to 100.000 Setting sensor "FAN1" Lower Non-Critical threshold to 200.000 root@NAS:/mnt/Storage/Scripts # ipmitool sensor CPU Temp | 23.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 95.000 | 100.000 | 100.000 PCH Temp | 28.000 | degrees C | ok | 0.000 | 5.000 | 16.000 | 90.000 | 95.000 | 100.000 System Temp | 20.000 | degrees C | ok | -10.000 | -5.000 | 0.000 | 80.000 | 85.000 | 90.000 Peripheral Temp | 23.000 | degrees C | ok | -14.000 | -9.000 | -4.000 | 76.000 | 81.000 | 86.000 VcpuVRM Temp | 22.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 95.000 | 100.000 | 105.000 DIMMA1 Temp | na | | na | na | na | na | na | na | na DIMMA2 Temp | 21.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000 DIMMB1 Temp | na | | na | na | na | na | na | na | na DIMMB2 Temp | 20.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000 FAN1 | 1000.000 | RPM | ok | 0.000 | 100.000 | 200.000 | 3200.000 | 3300.000 | 3400.000 FAN2 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FAN3 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FAN4 | 400.000 | RPM | nc | 200.000 | 300.000 | 400.000 | 2400.000 | 2500.000 | 2600.000 FANA | 700.000 | RPM | nc | 500.000 | 600.000 | 700.000 | 1300.000 | 1400.000 | 1500.000 12V | 12.448 | Volts | ok | 10.144 | 10.272 | 10.784 | 12.960 | 13.280 | 13.408 5VCC | 5.000 | Volts | ok | 4.246 | 4.298 | 4.480 | 5.390 | 5.546 | 5.598 3.3VCC | 3.384 | Volts | ok | 2.789 | 2.823 | 2.959 | 3.554 | 3.656 | 3.690 VBAT | 2.972 | Volts | ok | 2.384 | 2.496 | 2.580 | 3.476 | 3.588 | 3.672 VCPU | 1.039 | Volts | ok | 0.076 | 0.076 | 0.076 | 1.516 | 1.516 | 1.516 VDIMMAB | 1.200 | Volts | ok | 0.948 | 0.975 | 1.047 | 1.344 | 1.425 | 1.443 5VSB | 4.974 | Volts | ok | 4.246 | 4.376 | 4.480 | 5.390 | 5.546 | 5.598 3.3VSB | 3.231 | Volts | ok | 2.789 | 2.891 | 2.959 | 3.554 | 3.656 | 3.690 VBMC 1.2V | 1.209 | Volts | ok | 1.020 | 1.047 | 1.092 | 1.344 | 1.371 | 1.398 VPCH 1.0V | 1.007 | Volts | ok | 0.872 | 0.890 | 0.917 | 1.043 | 1.052 | 1.070 Chassis Intru | 0x0 | discrete | 0x0000| na | na | na | na | na | na root@NAS:/mnt/Storage/Scripts # cd /mnt/Storage/Scripts root@NAS:/mnt/Storage/Scripts # ls PID_fan_control.pl root@NAS:/mnt/Storage/Scripts # ./PID_fan_control.pl 2018-11-01 20:31:35: ada0 ada1 ada2 ada3 ada4 ada5 ada6 da0 da1 2018-11-01 20:31:35: ada0 2018-11-01 20:31:35: ada1 2018-11-01 20:31:35: ada2 2018-11-01 20:31:35: ada3 2018-11-01 20:31:35: ada4 2018-11-01 20:31:35: ada5 2018-11-01 20:31:35: ada6 2018-11-01 20:31:35: da0 2018-11-01 20:31:35: da1 2018-11-01 20:31:35: fanmode: full = 1 2018-11-01 20:31:35: Setting fan mode to 1 (full) 2018-11-01 20:31:40: core_temps: 26.0 26.0 31.0 31.0 2018-11-01 20:31:40: core_temp = 26.0 C 2018-11-01 20:31:40: core_temp = 26.0 C 2018-11-01 20:31:40: core_temp = 31.0 C 2018-11-01 20:31:40: core_temp = 31.0 C 2018-11-01 20:31:40: CPU Temp: 31.0 2018-11-01 20:31:40: CPU Temp: 31.0 <= 35, CPU Fan going low. 2018-11-01 20:31:40: CPU Fan: low 2018-11-01 20:31:40: CPU Fan changing... (low) 2018-11-01 20:31:40: Setting Zone 0 duty cycle to 40% 2018-11-01 20:31:40: ada0 ada1 ada2 ada3 ada4 ada5 ada6 da0 da1 2018-11-01 20:31:40: ada0 2018-11-01 20:31:40: ada1 2018-11-01 20:31:40: ada2 2018-11-01 20:31:40: ada3 2018-11-01 20:31:40: ada4 2018-11-01 20:31:40: ada5 2018-11-01 20:31:40: ada6 2018-11-01 20:31:40: da0 2018-11-01 20:31:40: da1 2018-11-01 20:31:41: temperature error = -13.8571428571429 2018-11-01 20:31:41: PID corrections are P = -110.857142857143, I = 0 and D = 0 2018-11-01 20:31:41: PID control new duty cycle is 30% 2018-11-01 20:31:41: Setting Zone 1 duty cycle to 30% 2018-11-01 20:31:41: core_temps: 30.0 30.0 26.0 26.0 2018-11-01 20:31:41: core_temp = 30.0 C 2018-11-01 20:31:41: core_temp = 30.0 C 2018-11-01 20:31:41: core_temp = 26.0 C 2018-11-01 20:31:41: core_temp = 26.0 C 2018-11-01 20:31:41: CPU Temp: 30.0 2018-11-01 20:31:42: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:31:42: core_temp = 27.0 C 2018-11-01 20:31:42: core_temp = 27.0 C 2018-11-01 20:31:42: core_temp = 24.0 C 2018-11-01 20:31:42: core_temp = 24.0 C 2018-11-01 20:31:42: CPU Temp: 27.0 2018-11-01 20:31:42: CPU Fan: low 2018-11-01 20:31:43: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:43: core_temp = 26.0 C 2018-11-01 20:31:43: core_temp = 26.0 C 2018-11-01 20:31:43: core_temp = 24.0 C 2018-11-01 20:31:43: core_temp = 24.0 C 2018-11-01 20:31:43: CPU Temp: 26.0 2018-11-01 20:31:43: CPU Fan: low 2018-11-01 20:31:44: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:31:44: core_temp = 25.0 C 2018-11-01 20:31:44: core_temp = 25.0 C 2018-11-01 20:31:44: core_temp = 24.0 C 2018-11-01 20:31:44: core_temp = 24.0 C 2018-11-01 20:31:44: CPU Temp: 25.0 2018-11-01 20:31:44: CPU Fan: low 2018-11-01 20:31:45: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:45: core_temp = 26.0 C 2018-11-01 20:31:45: core_temp = 26.0 C 2018-11-01 20:31:45: core_temp = 24.0 C 2018-11-01 20:31:45: core_temp = 24.0 C 2018-11-01 20:31:45: CPU Temp: 26.0 2018-11-01 20:31:45: CPU Fan: low 2018-11-01 20:31:46: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:31:46: core_temp = 25.0 C 2018-11-01 20:31:46: core_temp = 25.0 C 2018-11-01 20:31:46: core_temp = 24.0 C 2018-11-01 20:31:46: core_temp = 24.0 C 2018-11-01 20:31:46: CPU Temp: 25.0 2018-11-01 20:31:46: CPU Fan: low 2018-11-01 20:31:47: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:31:47: core_temp = 27.0 C 2018-11-01 20:31:47: core_temp = 27.0 C 2018-11-01 20:31:47: core_temp = 24.0 C 2018-11-01 20:31:47: core_temp = 24.0 C 2018-11-01 20:31:47: CPU Temp: 27.0 2018-11-01 20:31:47: CPU Fan: low 2018-11-01 20:31:48: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:48: core_temp = 26.0 C 2018-11-01 20:31:48: core_temp = 26.0 C 2018-11-01 20:31:48: core_temp = 24.0 C 2018-11-01 20:31:48: core_temp = 24.0 C 2018-11-01 20:31:48: CPU Temp: 26.0 2018-11-01 20:31:48: CPU Fan: low 2018-11-01 20:31:49: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:49: core_temp = 26.0 C 2018-11-01 20:31:49: core_temp = 26.0 C 2018-11-01 20:31:49: core_temp = 24.0 C 2018-11-01 20:31:49: core_temp = 24.0 C 2018-11-01 20:31:49: CPU Temp: 26.0 2018-11-01 20:31:49: CPU Fan: low 2018-11-01 20:31:51: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:31:51: core_temp = 27.0 C 2018-11-01 20:31:51: core_temp = 27.0 C 2018-11-01 20:31:51: core_temp = 24.0 C 2018-11-01 20:31:51: core_temp = 24.0 C 2018-11-01 20:31:51: CPU Temp: 27.0 2018-11-01 20:31:51: CPU Fan: low 2018-11-01 20:31:52: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:31:52: core_temp = 25.0 C 2018-11-01 20:31:52: core_temp = 25.0 C 2018-11-01 20:31:52: core_temp = 24.0 C 2018-11-01 20:31:52: core_temp = 24.0 C 2018-11-01 20:31:52: CPU Temp: 25.0 2018-11-01 20:31:52: CPU Fan: low 2018-11-01 20:31:52: fan_speed = 3100 2018-11-01 20:31:52: CPU Fan speed: 3100 RPM 2018-11-01 20:31:52: fan_speed = 1100 2018-11-01 20:31:52: HD Fan speed: 1100 RPM 2018-11-01 20:31:52: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:31:52: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:31:52: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-11-01 20:31:52: Fan speeds are not where they should be, will try again. 2018-11-01 20:31:52: fanmode: full = 1 2018-11-01 20:31:52: Setting fan mode to 1 (full) 2018-11-01 20:31:58: Setting Zone 0 duty cycle to 40% 2018-11-01 20:31:58: Setting Zone 1 duty cycle to 30% 2018-11-01 20:31:59: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:31:59: core_temp = 26.0 C 2018-11-01 20:31:59: core_temp = 26.0 C 2018-11-01 20:31:59: core_temp = 24.0 C 2018-11-01 20:31:59: core_temp = 24.0 C 2018-11-01 20:31:59: CPU Temp: 26.0 2018-11-01 20:31:59: CPU Fan: low 2018-11-01 20:32:00: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:00: core_temp = 25.0 C 2018-11-01 20:32:00: core_temp = 25.0 C 2018-11-01 20:32:00: core_temp = 24.0 C 2018-11-01 20:32:00: core_temp = 24.0 C 2018-11-01 20:32:00: CPU Temp: 25.0 2018-11-01 20:32:00: CPU Fan: low 2018-11-01 20:32:01: core_temps: 25.0 26.0 25.0 25.0 2018-11-01 20:32:01: core_temp = 25.0 C 2018-11-01 20:32:01: core_temp = 26.0 C 2018-11-01 20:32:01: core_temp = 25.0 C 2018-11-01 20:32:01: core_temp = 25.0 C 2018-11-01 20:32:01: CPU Temp: 26.0 2018-11-01 20:32:01: CPU Fan: low 2018-11-01 20:32:02: core_temps: 25.0 26.0 25.0 25.0 2018-11-01 20:32:02: core_temp = 25.0 C 2018-11-01 20:32:02: core_temp = 26.0 C 2018-11-01 20:32:02: core_temp = 25.0 C 2018-11-01 20:32:02: core_temp = 25.0 C 2018-11-01 20:32:02: CPU Temp: 26.0 2018-11-01 20:32:02: CPU Fan: low 2018-11-01 20:32:03: core_temps: 25.0 25.0 23.0 23.0 2018-11-01 20:32:03: core_temp = 25.0 C 2018-11-01 20:32:03: core_temp = 25.0 C 2018-11-01 20:32:03: core_temp = 23.0 C 2018-11-01 20:32:03: core_temp = 23.0 C 2018-11-01 20:32:03: CPU Temp: 25.0 2018-11-01 20:32:03: CPU Fan: low 2018-11-01 20:32:04: core_temps: 26.0 26.0 23.0 23.0 2018-11-01 20:32:04: core_temp = 26.0 C 2018-11-01 20:32:04: core_temp = 26.0 C 2018-11-01 20:32:04: core_temp = 23.0 C 2018-11-01 20:32:04: core_temp = 23.0 C 2018-11-01 20:32:04: CPU Temp: 26.0 2018-11-01 20:32:04: CPU Fan: low 2018-11-01 20:32:05: core_temps: 24.0 26.0 24.0 24.0 2018-11-01 20:32:05: core_temp = 24.0 C 2018-11-01 20:32:05: core_temp = 26.0 C 2018-11-01 20:32:05: core_temp = 24.0 C 2018-11-01 20:32:05: core_temp = 24.0 C 2018-11-01 20:32:05: CPU Temp: 26.0 2018-11-01 20:32:05: CPU Fan: low 2018-11-01 20:32:06: core_temps: 24.0 27.0 24.0 24.0 2018-11-01 20:32:06: core_temp = 24.0 C 2018-11-01 20:32:06: core_temp = 27.0 C 2018-11-01 20:32:06: core_temp = 24.0 C 2018-11-01 20:32:06: core_temp = 24.0 C 2018-11-01 20:32:06: CPU Temp: 27.0 2018-11-01 20:32:06: CPU Fan: low 2018-11-01 20:32:07: core_temps: 26.0 26.0 23.0 23.0 2018-11-01 20:32:07: core_temp = 26.0 C 2018-11-01 20:32:07: core_temp = 26.0 C 2018-11-01 20:32:07: core_temp = 23.0 C 2018-11-01 20:32:07: core_temp = 23.0 C 2018-11-01 20:32:07: CPU Temp: 26.0 2018-11-01 20:32:07: CPU Fan: low 2018-11-01 20:32:08: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:08: core_temp = 26.0 C 2018-11-01 20:32:08: core_temp = 26.0 C 2018-11-01 20:32:08: core_temp = 24.0 C 2018-11-01 20:32:08: core_temp = 24.0 C 2018-11-01 20:32:08: CPU Temp: 26.0 2018-11-01 20:32:08: CPU Fan: low 2018-11-01 20:32:09: core_temps: 24.0 24.0 24.0 24.0 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: core_temp = 24.0 C 2018-11-01 20:32:09: CPU Temp: 24.0 2018-11-01 20:32:09: CPU Fan: low 2018-11-01 20:32:09: fan_speed = 3100 2018-11-01 20:32:09: CPU Fan speed: 3100 RPM 2018-11-01 20:32:10: fan_speed = 1100 2018-11-01 20:32:10: HD Fan speed: 1100 RPM 2018-11-01 20:32:10: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:32:10: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:32:10: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-11-01 20:32:10: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-11-01 20:32:10: fanmode: full = 1 2018-11-01 20:32:10: Setting fan mode to 1 (full) 2018-11-01 20:32:15: Resetting BMC 2018-11-01 20:32:16: core_temps: 26.0 26.0 25.0 25.0 2018-11-01 20:32:16: core_temp = 26.0 C 2018-11-01 20:32:16: core_temp = 26.0 C 2018-11-01 20:32:16: core_temp = 25.0 C 2018-11-01 20:32:16: core_temp = 25.0 C 2018-11-01 20:32:16: CPU Temp: 26.0 2018-11-01 20:32:16: CPU Fan: low 2018-11-01 20:32:17: core_temps: 28.0 28.0 27.0 27.0 2018-11-01 20:32:17: core_temp = 28.0 C 2018-11-01 20:32:17: core_temp = 28.0 C 2018-11-01 20:32:17: core_temp = 27.0 C 2018-11-01 20:32:17: core_temp = 27.0 C 2018-11-01 20:32:17: CPU Temp: 28.0 2018-11-01 20:32:17: CPU Fan: low 2018-11-01 20:32:18: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:18: core_temp = 26.0 C 2018-11-01 20:32:18: core_temp = 26.0 C 2018-11-01 20:32:18: core_temp = 24.0 C 2018-11-01 20:32:18: core_temp = 24.0 C 2018-11-01 20:32:18: CPU Temp: 26.0 2018-11-01 20:32:18: CPU Fan: low 2018-11-01 20:32:19: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:19: core_temp = 25.0 C 2018-11-01 20:32:19: core_temp = 25.0 C 2018-11-01 20:32:19: core_temp = 24.0 C 2018-11-01 20:32:19: core_temp = 24.0 C 2018-11-01 20:32:19: CPU Temp: 25.0 2018-11-01 20:32:19: CPU Fan: low 2018-11-01 20:32:20: core_temps: 24.0 24.0 24.0 25.0 2018-11-01 20:32:20: core_temp = 24.0 C 2018-11-01 20:32:20: core_temp = 24.0 C 2018-11-01 20:32:20: core_temp = 24.0 C 2018-11-01 20:32:20: core_temp = 25.0 C 2018-11-01 20:32:20: CPU Temp: 25.0 2018-11-01 20:32:20: CPU Fan: low 2018-11-01 20:32:21: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:32:21: core_temp = 27.0 C 2018-11-01 20:32:21: core_temp = 27.0 C 2018-11-01 20:32:21: core_temp = 24.0 C 2018-11-01 20:32:21: core_temp = 24.0 C 2018-11-01 20:32:21: CPU Temp: 27.0 2018-11-01 20:32:21: CPU Fan: low 2018-11-01 20:32:22: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:22: core_temp = 26.0 C 2018-11-01 20:32:22: core_temp = 26.0 C 2018-11-01 20:32:22: core_temp = 24.0 C 2018-11-01 20:32:22: core_temp = 24.0 C 2018-11-01 20:32:22: CPU Temp: 26.0 2018-11-01 20:32:22: CPU Fan: low 2018-11-01 20:32:23: core_temps: 27.0 27.0 25.0 25.0 2018-11-01 20:32:23: core_temp = 27.0 C 2018-11-01 20:32:23: core_temp = 27.0 C 2018-11-01 20:32:23: core_temp = 25.0 C 2018-11-01 20:32:23: core_temp = 25.0 C 2018-11-01 20:32:23: CPU Temp: 27.0 2018-11-01 20:32:23: CPU Fan: low 2018-11-01 20:32:24: core_temps: 26.0 26.0 24.0 25.0 2018-11-01 20:32:24: core_temp = 26.0 C 2018-11-01 20:32:24: core_temp = 26.0 C 2018-11-01 20:32:24: core_temp = 24.0 C 2018-11-01 20:32:24: core_temp = 25.0 C 2018-11-01 20:32:24: CPU Temp: 26.0 2018-11-01 20:32:24: CPU Fan: low 2018-11-01 20:32:25: core_temps: 24.0 24.0 24.0 24.0 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: core_temp = 24.0 C 2018-11-01 20:32:25: CPU Temp: 24.0 2018-11-01 20:32:25: CPU Fan: low 2018-11-01 20:32:26: core_temps: 25.0 25.0 24.0 25.0 2018-11-01 20:32:26: core_temp = 25.0 C 2018-11-01 20:32:26: core_temp = 25.0 C 2018-11-01 20:32:26: core_temp = 24.0 C 2018-11-01 20:32:26: core_temp = 25.0 C 2018-11-01 20:32:26: CPU Temp: 25.0 2018-11-01 20:32:26: CPU Fan: low 2018-11-01 20:32:27: fan_speed = 3100 2018-11-01 20:32:27: CPU Fan speed: 3100 RPM 2018-11-01 20:32:27: fan_speed = 1100 2018-11-01 20:32:27: HD Fan speed: 1100 RPM 2018-11-01 20:32:27: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:32:27: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:32:27: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-11-01 20:32:27: Fan speeds are not where they should be, will try again. 2018-11-01 20:32:27: fanmode: full = 1 2018-11-01 20:32:27: Setting fan mode to 1 (full) 2018-11-01 20:32:32: Setting Zone 0 duty cycle to 40% 2018-11-01 20:32:32: Setting Zone 1 duty cycle to 30% 2018-11-01 20:32:33: core_temps: 30.0 30.0 26.0 29.0 2018-11-01 20:32:33: core_temp = 30.0 C 2018-11-01 20:32:33: core_temp = 30.0 C 2018-11-01 20:32:33: core_temp = 26.0 C 2018-11-01 20:32:33: core_temp = 29.0 C 2018-11-01 20:32:33: CPU Temp: 30.0 2018-11-01 20:32:33: CPU Fan: low 2018-11-01 20:32:34: core_temps: 25.0 25.0 23.0 24.0 2018-11-01 20:32:34: core_temp = 25.0 C 2018-11-01 20:32:34: core_temp = 25.0 C 2018-11-01 20:32:34: core_temp = 23.0 C 2018-11-01 20:32:34: core_temp = 24.0 C 2018-11-01 20:32:34: CPU Temp: 25.0 2018-11-01 20:32:34: CPU Fan: low 2018-11-01 20:32:35: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:35: core_temp = 26.0 C 2018-11-01 20:32:35: core_temp = 26.0 C 2018-11-01 20:32:35: core_temp = 24.0 C 2018-11-01 20:32:35: core_temp = 24.0 C 2018-11-01 20:32:35: CPU Temp: 26.0 2018-11-01 20:32:35: CPU Fan: low 2018-11-01 20:32:36: core_temps: 25.0 25.0 25.0 25.0 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: core_temp = 25.0 C 2018-11-01 20:32:36: CPU Temp: 25.0 2018-11-01 20:32:36: CPU Fan: low 2018-11-01 20:32:37: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:37: core_temp = 25.0 C 2018-11-01 20:32:37: core_temp = 25.0 C 2018-11-01 20:32:37: core_temp = 24.0 C 2018-11-01 20:32:37: core_temp = 24.0 C 2018-11-01 20:32:37: CPU Temp: 25.0 2018-11-01 20:32:37: CPU Fan: low 2018-11-01 20:32:38: core_temps: 25.0 25.0 24.0 25.0 2018-11-01 20:32:38: core_temp = 25.0 C 2018-11-01 20:32:38: core_temp = 25.0 C 2018-11-01 20:32:38: core_temp = 24.0 C 2018-11-01 20:32:38: core_temp = 25.0 C 2018-11-01 20:32:38: CPU Temp: 25.0 2018-11-01 20:32:38: CPU Fan: low 2018-11-01 20:32:40: core_temps: 26.0 26.0 25.0 25.0 2018-11-01 20:32:40: core_temp = 26.0 C 2018-11-01 20:32:40: core_temp = 26.0 C 2018-11-01 20:32:40: core_temp = 25.0 C 2018-11-01 20:32:40: core_temp = 25.0 C 2018-11-01 20:32:40: CPU Temp: 26.0 2018-11-01 20:32:40: CPU Fan: low 2018-11-01 20:32:41: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:41: core_temp = 25.0 C 2018-11-01 20:32:41: core_temp = 25.0 C 2018-11-01 20:32:41: core_temp = 24.0 C 2018-11-01 20:32:41: core_temp = 24.0 C 2018-11-01 20:32:41: CPU Temp: 25.0 2018-11-01 20:32:41: CPU Fan: low 2018-11-01 20:32:42: core_temps: 26.0 26.0 23.0 24.0 2018-11-01 20:32:42: core_temp = 26.0 C 2018-11-01 20:32:42: core_temp = 26.0 C 2018-11-01 20:32:42: core_temp = 23.0 C 2018-11-01 20:32:42: core_temp = 24.0 C 2018-11-01 20:32:42: CPU Temp: 26.0 2018-11-01 20:32:42: CPU Fan: low 2018-11-01 20:32:43: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:43: core_temp = 26.0 C 2018-11-01 20:32:43: core_temp = 26.0 C 2018-11-01 20:32:43: core_temp = 24.0 C 2018-11-01 20:32:43: core_temp = 24.0 C 2018-11-01 20:32:43: CPU Temp: 26.0 2018-11-01 20:32:43: CPU Fan: low 2018-11-01 20:32:43: fan_speed = 3100 2018-11-01 20:32:43: CPU Fan speed: 3100 RPM 2018-11-01 20:32:43: fan_speed = 1100 2018-11-01 20:32:43: HD Fan speed: 1100 RPM 2018-11-01 20:32:43: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:32:43: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:32:43: bmc_fail_count: 2, bmc_fail_threshold: 1 2018-11-01 20:32:43: Fan speeds are still not where they should be after 2 attempts, will reboot BMC. 2018-11-01 20:32:43: fanmode: full = 1 2018-11-01 20:32:43: Setting fan mode to 1 (full) 2018-11-01 20:32:49: Resetting BMC 2018-11-01 20:32:50: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:32:50: core_temp = 26.0 C 2018-11-01 20:32:50: core_temp = 26.0 C 2018-11-01 20:32:50: core_temp = 24.0 C 2018-11-01 20:32:50: core_temp = 24.0 C 2018-11-01 20:32:50: CPU Temp: 26.0 2018-11-01 20:32:50: CPU Fan: low 2018-11-01 20:32:51: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:51: core_temp = 25.0 C 2018-11-01 20:32:51: core_temp = 25.0 C 2018-11-01 20:32:51: core_temp = 24.0 C 2018-11-01 20:32:51: core_temp = 24.0 C 2018-11-01 20:32:51: CPU Temp: 25.0 2018-11-01 20:32:51: CPU Fan: low 2018-11-01 20:32:52: core_temps: 25.0 25.0 24.0 24.0 2018-11-01 20:32:52: core_temp = 25.0 C 2018-11-01 20:32:52: core_temp = 25.0 C 2018-11-01 20:32:52: core_temp = 24.0 C 2018-11-01 20:32:52: core_temp = 24.0 C 2018-11-01 20:32:52: CPU Temp: 25.0 2018-11-01 20:32:52: CPU Fan: low 2018-11-01 20:32:53: core_temps: 27.0 27.0 24.0 24.0 2018-11-01 20:32:53: core_temp = 27.0 C 2018-11-01 20:32:53: core_temp = 27.0 C 2018-11-01 20:32:53: core_temp = 24.0 C 2018-11-01 20:32:53: core_temp = 24.0 C 2018-11-01 20:32:53: CPU Temp: 27.0 2018-11-01 20:32:53: CPU Fan: low 2018-11-01 20:32:54: core_temps: 25.0 27.0 24.0 24.0 2018-11-01 20:32:54: core_temp = 25.0 C 2018-11-01 20:32:54: core_temp = 27.0 C 2018-11-01 20:32:54: core_temp = 24.0 C 2018-11-01 20:32:54: core_temp = 24.0 C 2018-11-01 20:32:54: CPU Temp: 27.0 2018-11-01 20:32:54: CPU Fan: low 2018-11-01 20:32:55: core_temps: 25.0 25.0 23.0 23.0 2018-11-01 20:32:55: core_temp = 25.0 C 2018-11-01 20:32:55: core_temp = 25.0 C 2018-11-01 20:32:55: core_temp = 23.0 C 2018-11-01 20:32:55: core_temp = 23.0 C 2018-11-01 20:32:55: CPU Temp: 25.0 2018-11-01 20:32:55: CPU Fan: low 2018-11-01 20:32:56: core_temps: 26.0 26.0 23.0 23.0 2018-11-01 20:32:56: core_temp = 26.0 C 2018-11-01 20:32:56: core_temp = 26.0 C 2018-11-01 20:32:56: core_temp = 23.0 C 2018-11-01 20:32:56: core_temp = 23.0 C 2018-11-01 20:32:56: CPU Temp: 26.0 2018-11-01 20:32:56: CPU Fan: low 2018-11-01 20:32:57: core_temps: 25.0 26.0 25.0 25.0 2018-11-01 20:32:57: core_temp = 25.0 C 2018-11-01 20:32:57: core_temp = 26.0 C 2018-11-01 20:32:57: core_temp = 25.0 C 2018-11-01 20:32:57: core_temp = 25.0 C 2018-11-01 20:32:57: CPU Temp: 26.0 2018-11-01 20:32:57: CPU Fan: low 2018-11-01 20:32:58: core_temps: 25.0 25.0 25.0 25.0 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: core_temp = 25.0 C 2018-11-01 20:32:58: CPU Temp: 25.0 2018-11-01 20:32:58: CPU Fan: low 2018-11-01 20:32:59: core_temps: 25.0 25.0 23.0 23.0 2018-11-01 20:32:59: core_temp = 25.0 C 2018-11-01 20:32:59: core_temp = 25.0 C 2018-11-01 20:32:59: core_temp = 23.0 C 2018-11-01 20:32:59: core_temp = 23.0 C 2018-11-01 20:32:59: CPU Temp: 25.0 2018-11-01 20:32:59: CPU Fan: low 2018-11-01 20:33:00: core_temps: 33.0 33.0 27.0 30.0 2018-11-01 20:33:00: core_temp = 33.0 C 2018-11-01 20:33:00: core_temp = 33.0 C 2018-11-01 20:33:00: core_temp = 27.0 C 2018-11-01 20:33:00: core_temp = 30.0 C 2018-11-01 20:33:00: CPU Temp: 33.0 2018-11-01 20:33:00: CPU Fan: low 2018-11-01 20:33:00: fan_speed = 3100 2018-11-01 20:33:00: CPU Fan speed: 3100 RPM 2018-11-01 20:33:01: fan_speed = 1100 2018-11-01 20:33:01: HD Fan speed: 1100 RPM 2018-11-01 20:33:01: CPU fan speed should be low, but 3100 > 2000. 2018-11-01 20:33:01: HD fan speed should be low, but 1100 > 1040. 2018-11-01 20:33:01: bmc_fail_count: 1, bmc_fail_threshold: 1 2018-11-01 20:33:01: Fan speeds are not where they should be, will try again. 2018-11-01 20:33:01: fanmode: full = 1 2018-11-01 20:33:01: Setting fan mode to 1 (full) 2018-11-01 20:33:06: Setting Zone 0 duty cycle to 40% 2018-11-01 20:33:06: Setting Zone 1 duty cycle to 30% 2018-11-01 20:33:07: core_temps: 26.0 26.0 24.0 24.0 2018-11-01 20:33:07: core_temp = 26.0 C 2018-11-01 20:33:07: core_temp = 26.0 C 2018-11-01 20:33:07: core_temp = 24.0 C 2018-11-01 20:33:07: core_temp = 24.0 C 2018-11-01 20:33:07: CPU Temp: 26.0 2018-11-01 20:33:07: CPU Fan: low 2018-11-01 20:33:08: core_temps: 25.0 25.0 25.0 25.0 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: core_temp = 25.0 C 2018-11-01 20:33:08: CPU Temp: 25.0 2018-11-01 20:33:08: CPU Fan: low ^C root@NAS:/mnt/Storage/Scripts #