smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SiliconMotion based SSDs Device Model: TS32GSSD370S Serial Number: 0200823AE15443110124 Firmware Version: P1225CE User Capacity: 32,017,047,552 bytes [32.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu May 23 20:24:46 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 35 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 182 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 52 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 16 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 52965 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 102 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 0 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 51 168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000 169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 99 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 2 178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 120 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 23 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 21770 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 1010 245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 52965 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.