iX-1204 Rackmount 1U Server

iX-Neutron Series

The iX-Neutron series servers feature the latest Intel® CPU's based on the 32nm and 45nm next-generation microarchitecture, which represents the next step in intelligent performance, automated energy efficiency, and flexible virtualization.

Features

Check out the features!

  • 1U Form Factor with 4 Hot-Swap SAS/SATA 3.5" Drive Bays
  • Supports Dual Intel® 64-Bit Six-Core, Quad-Core or Dual-Core 5600/5500 Series Xeon® processors
  • Intel® 5520 chipset with QuickPath Interconnect (QPI)
  • X8DTU-F: VMWare® Ready certified motherboard
  • Up to 192GB DDR3 1333/1066/800 SDRAM ECC Registered Memory (12 DIMM Slots)
  • 2 PCI-E 2.0 x8 or 1 PCI-E x16 Expansion Slots
  • Intel 82576 Dual Port Gigabit Ethernet Controller
  • Matrox G200eW Graphics
  • Remote Management - IPMI 2.0 + IP-KVM with dedicated LAN
  • Slim DVD
  • Option of either 720W Redundant High-efficiency power supply (Gold Level 91%+) or Single 560W High-efficiency power supply (Gold Level 91%+)

VMWare Certified

Specs

Our products use the latest and greatest technology.

Motherboard
CPU Supports Dual Intel® Xeon® processor 5600/5500
Series, with QPI up to 6.4 GT/s
Memory 12x 240-pin DIMM sockets
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
Memory Mirroring supported
Chipset Intel® 5520 Chipset
Network Intel® 82576 Dual-Port Gigabit Ethernet Controller 1x Realtek RTL8201N PHY (dedicated IPMI)
Remote Management Integrated Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Dedicated LAN Winbond® WPCM450 BMC
Video Onboard Matrox G200eW Graphics
Chassis
Form Factor 1U rack-mountable chassis
Dimensions 17.2"W x 1.7"H x 25.6"D
Fans 4x 4cm Counter-rotating PWM fans
Mounting Rails Yes
Storage
Hard Drive Bays 4 x 3.5" Hot-Swap SAS/SATA
Solid State Storage Optional
Optical Drive (Optional) Slim CD-ROM / DVD-ROM / DVD-RW Drive
Onboard RAID
Controller Intel ICH10R SATA built-in 3.0Gbps RAID Controller
RAID support SATA 3.0Gbps Controller provides RAID 0, 1, 5, and 10
Expandability
Expansion Slot 1 (x16) PCI-E 2.0 + 1 Universal IO slot
Multiple I/O
USB Ports 2 x rear USB ports
4 x USB internal headers 2 x USB on-board ports (8 ports)
Serial ATA 6 x SATA 3.0 Gbps ports
IDE No
Serial Ports 1 x Fast UART 16550 serial port
1 x Fast UART 16550 serial header (Option)
PS/2 Keyboard Yes
PS/2 Mouse Yes
LAN 2 x LAN ports, RJ-45
VGA 1 x VGA port
Front Panel
Power Button Yes
System Reset Button Yes
Power LED Yes
Hard Drive Activity LED Yes
Network Activity LEDs Yes, 2 x Network Activity LEDs
System Overheat LED Yes
Power Fail LED Yes
Front Ports No
Power
Power Supply Option of either 720W Redundant High-efficiency power supply (Gold Level 91%+) or Single 560W High-efficiency power supply (Gold Level 91%+)

Remote Management

iXsystems remote server management (based on the IPMI standard) consists of hardware and software components that allow system administrators to securely manage, monitor, diagnose, troubleshoot, and repair servers from a remote location, any place, any time.

IPMI provides many benefits, including:

  • Save time and money by configuring, monitoring, and troubleshooting servers remotely, conserving on-site resources and saving time.
  • Manage distributed servers from a remote console: a dedicated network card or shared onboard LAN port gives you full access to power management, remote media redirection, and remote KVM access.
  • Better Disaster recovery: Access a server even after a server failure, power outage, or connection interruption.
  • Simple Interface: Control the server from any java-enabled web browser, even if the server is down.

To learn more, visit our IPMI page

Request Quote