iX-1204-10G Rackmount 1U Server

The iX-1204-10G series servers feature the latest Intel® CPU's based on the 32nm and 45nm next-generation microarchitecture, which represents the next step in intelligent performance, automated energy efficiency, and flexible virtualization.

The iX-1204-10G features dual on-board Intel® 82599ES 10 Gigabit SFP+ Ports, Intel® 82576 Dual-Port Gigabit Ports, and Dual Intel® Xeon® 5600/5500 series processors, and 18 DIMM slots supporting up to 192GB of DDR3 ECC Registered memory.

Features

Check out the features!

  • 1U Form Factor with 4 Hot-Swap SAS/SATA 3.5" Drive Bays
  • Supports Dual Intel® 64-Bit Six-Core, Quad-Core or Dual-Core 5600/5500 Series Xeon® processors
  • Intel® 5520 chipset with QuickPath Interconnect (QPI)
  • Up to 192GB DDR3 1333/1066/800 SDRAM ECC Registered Memory (18 DIMM Slots)
  • 2 PCI-E 2.0 x8,1 (x4) PCI-E 2.0 (in x8 slot -Low-Profile - 5.5" depth) Expansion Slots
  • Dual Port Intel® 82599ES 10 Gigabit SFP+ - Dual Port Intel® 82576 Gigabit Ethernet Controller
  • Matrox G200eW Graphics
  • Remote Management - IPMI 2.0 + IP-KVM with dedicated LAN
  • Slim DVD
  • 700W/750W Redundant AC-DC 93%+ High-efficiency Power Supply

Specs

Our products use the latest and greatest technology.

Motherboard
CPU Supports Dual Intel® Xeon® processor 5600/5500 Series, with QPI up to 6.4 GT/s
Memory Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Chipset Intel® 5520 Chipset
Network Intel® 82599ES 10 Gigabit Ethernet Controller with 2 SFP+ interfaces – Intel® 82576 Dual-Port Gigabit Ethernet Controller  1x Realtek RTL8201N PHY (dedicated IPMI)
Remote Management (IPMI) Integrated Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Dedicated LAN Winbond® WPCM450 BMC
Video Integrated Matrox G200eW Graphics
Chassis
Form Factor 1U rack-mountable chassis
Dimensions 17.2"W x 1.7"H x 27.75"D
Fans 5 x 4cm Counter-rotating PWM fans
Mounting Rails Yes - Rail set, quick/quick
Storage
Hard Drive Bays 4 x 3.5" Hot-Swap SAS/SATA
Solid State Storage Optional
Optical Drive Slim CD-ROM / DVD-ROM / DVD-RW Drive
Onboard RAID
Controller LSI 6Gbps SAS 2108 w/ Hardware RAID support (Battery Back-Up Unit Available) – Intel ICH10R SATA built-in 3.0Gbps RAID Controller
RAID support SAS RAID 0, 1, 5, 6, 10, 50, 60 support – SATA RAID 0, 1, 5, 10 support
Expandability
Expansion Slot 2 (x8) PCI-E 2.0 slots + 1 (x4) PCI-E 2.0 (in x8 slot -Low-Profile - 5.5" depth)
Multiple I/O
USB Ports 2 x USB rear ports
1 x USB on-board
2 x USB internal headers
Serial ATA 6 x SATA 3.0 Gbps ports
IDE No
Serial Ports 1 x Fast UART 16550 serial port
1 x Fast UART 16550 serial header (Option)
PS/2 Keyboard Yes
PS/2 Mouse Yes
LAN 2 x RJ45 LAN ports
2 x SFP+ LAN ports
1 x RJ45 Dedicated IPMI LAN port
VGA 1 x VGA port
Front Panel
Power Button Yes
System Reset Button Yes
Power LED Yes
Hard Drive Activity LED Yes
Network Activity LEDs Yes, 2 x Network Activity LEDs
System Overheat LED Yes
Power Fail LED Yes
Front Ports No
Power
Power Supply 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C

Remote Management

iXsystems remote server management (based on the IPMI standard) consists of hardware and software components that allow system administrators to securely manage, monitor, diagnose, troubleshoot, and repair servers from a remote location, any place, any time.

IPMI provides many benefits, including:

  • Save time and money by configuring, monitoring, and troubleshooting servers remotely, conserving on-site resources and saving time.
  • Manage distributed servers from a remote console: a dedicated network card or shared onboard LAN port gives you full access to power management, remote media redirection, and remote KVM access.
  • Better Disaster recovery: Access a server even after a server failure, power outage, or connection interruption.
  • Simple Interface: Control the server from any java-enabled web browser, even if the server is down.

To learn more, visit our IPMI page

Request Quote