Hello all
Need help with my new LSI 9300-16i hba.
My TrueNas build:
Dell poweredge T330 Xeon 1220 V5
64gb ecc ram
8x1tb hdd 7200 sata
8x500gb commodity SSDs in 2 x4 icy dock cage.
Adaptec ASR 71605 1GB 16Port HBA RAID PCIe in IT mode.
2x10gbs sfp+
Everything was working great but after reading through the forum I decided to buy an LSI 9300-16i hba.
Now with the new LSI adapter some of my SSDs will not get picked up during boot
Usually I,m missing 2 ssds.
I also noticed that during boot the LEDs for 1 SSD cage will not come up until TrueNas boots up
Any ideas what is wrong here.
Is the adapter faulty
Need help with my new LSI 9300-16i hba.
My TrueNas build:
Dell poweredge T330 Xeon 1220 V5
64gb ecc ram
8x1tb hdd 7200 sata
8x500gb commodity SSDs in 2 x4 icy dock cage.
Adaptec ASR 71605 1GB 16Port HBA RAID PCIe in IT mode.
2x10gbs sfp+
Everything was working great but after reading through the forum I decided to buy an LSI 9300-16i hba.
Now with the new LSI adapter some of my SSDs will not get picked up during boot
Usually I,m missing 2 ssds.
I also noticed that during boot the LEDs for 1 SSD cage will not come up until TrueNas boots up
Any ideas what is wrong here.
Is the adapter faulty